Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green DDR5 RDIMM modules in a kit, bare circuit boards with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 256GB (4×64GB) DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro H13SSW

SKU CH-4H5B-FMMC4

A 256 GB DDR5 ECC registered server memory kit of four 64 GB modules running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro H13SSW motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Ver 24 configuraciones más
  • 256 GB total capacity from four 64 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H13SSW
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory controller specification exactly
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise-grade component quality

Server-grade DDR5 ECC RDIMM kit

This 256 GB kit contains four 64 GB DDR5-5600 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSW memory controller expects. It targets administrators who need maximum supported capacity on that specific platform without manual tuning.

Fits the H13SSW DIMM slots directly

The 288-pin Registered form factor matches the board's required RDIMM architecture; UDIMM or SODIMM modules will not work. Populating all four channels with 2Rx4 registered DIMMs offloads the memory controller and allows full-capacity operation at the rated 5600 MT/s speed.

Sustained enterprise stability

Registered buffering and on-die ECC correct single-bit errors continuously during long-running workloads, preventing silent data corruption and unplanned reboots. The 1.10 V operating voltage and CL46 latency are maintained across full population for consistent throughput under load.

Puntos fuertes

  • 256 GB total capacity from four 64 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H13SSW
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory controller specification exactly
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise-grade component quality

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the 1.1 V registered ECC modules sustain their rated 5600 speed when all four slots of the Supermicro H13SSW are populated?

The kit is spec-matched to the board's memory-population rules, so the registered architecture lets every slot run fully populated at the rated DDR5 5600 speed.

How much heat and power should I expect from the 256 GB kit running continuously in a server chassis?

Each 64 GB module operates at 1.1 V without a heat spreader, so the registered design keeps power draw and thermals low enough for standard server airflow.

Does my Supermicro H13SSW need a specific BIOS revision or CPU stepping before it will recognise the 2Rx4 registered DIMMs?

The modules are an exact-match upgrade validated for the H13SSW motherboard; consult the system manual for approved population order and installation steps.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.