Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green DDR5 RDIMM modules in a kit, bare circuit boards with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 256GB (4×64GB) DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro H13SSW

SKU CH-4H5B-FMMC4

A 256 GB DDR5 ECC registered server memory kit of four 64 GB modules running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro H13SSW motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Ver as outras 24 configurações
  • 256 GB total capacity from four 64 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H13SSW
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory controller specification exactly
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise-grade component quality

Server-grade DDR5 ECC RDIMM kit

This 256 GB kit contains four 64 GB DDR5-5600 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSW memory controller expects. It targets administrators who need maximum supported capacity on that specific platform without manual tuning.

Fits the H13SSW DIMM slots directly

The 288-pin Registered form factor matches the board's required RDIMM architecture; UDIMM or SODIMM modules will not work. Populating all four channels with 2Rx4 registered DIMMs offloads the memory controller and allows full-capacity operation at the rated 5600 MT/s speed.

Sustained enterprise stability

Registered buffering and on-die ECC correct single-bit errors continuously during long-running workloads, preventing silent data corruption and unplanned reboots. The 1.10 V operating voltage and CL46 latency are maintained across full population for consistent throughput under load.

Pontos fortes

  • 256 GB total capacity from four 64 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H13SSW
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory controller specification exactly
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise-grade component quality

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will the 1.1 V registered ECC modules sustain their rated 5600 speed when all four slots of the Supermicro H13SSW are populated?

The kit is spec-matched to the board's memory-population rules, so the registered architecture lets every slot run fully populated at the rated DDR5 5600 speed.

How much heat and power should I expect from the 256 GB kit running continuously in a server chassis?

Each 64 GB module operates at 1.1 V without a heat spreader, so the registered design keeps power draw and thermals low enough for standard server airflow.

Does my Supermicro H13SSW need a specific BIOS revision or CPU stepping before it will recognise the 2Rx4 registered DIMMs?

The modules are an exact-match upgrade validated for the H13SSW motherboard; consult the system manual for approved population order and installation steps.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.