SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00497696BTC
En stock
NEMIX RAM
NEMIX RAM 384GB (8x48GB) DDR5-6400 CL52 2Rx8 ECC RDIMM Supermicro H14DSH
A 384 GB DDR5-6400 ECC RDIMM kit of eight 48 GB modules at CL52, 1.1 V, 2Rx8, validated for the Supermicro H14DSH motherboard
- Capacity384GB (8 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from eight 48 GB modules for high-density server workloads
- DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H14DSH
- Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
- 10 V operation matches the platform's voltage requirement for stable full-population runs
- 288-pin RDIMM form factor fits the board's memory slots exactly as specified
Exact-match upgrade kit
This 384GB kit contains eight 48GB DDR5-6400 PC5-51200 registered ECC RDIMMs built to CL52 timings at 1.1V. The modules use a 2Rx8 organization and 288-pin form factor that the Supermicro H14DSH memory controller expects for full-capacity recognition and rated-speed operation.
Installation and common issues
The RDIMMs insert into the board's 288-pin DDR5 slots like any registered DIMM, but the server manual defines the exact population sequence for eight modules. Deviating from that order or mixing ranks is the most frequent cause of a no-post condition or reduced capacity.
Pre-order verification
Confirm the H14DSH manual lists 48GB RDIMMs in an eight-DIMM configuration and note the required slot-filling order. Verify the BIOS revision supports this density at DDR5-6400 before ordering, because unsupported firmware will limit speed or prevent boot.
Puntos fuertes
- 384 GB total capacity from eight 48 GB modules for high-density server workloads
- DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H14DSH
- Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
- 10 V operation matches the platform's voltage requirement for stable full-population runs
- 288-pin RDIMM form factor fits the board's memory slots exactly as specified
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K8 |
| Capacity | 384GB (8 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
How do I confirm the 384GB kit is running at DDR5-6400 CL52 after installing it in my Supermicro H14DSH?
Check the BIOS memory information screen or a tool like dmidecode; each of the eight 48GB RDIMMs should report 6400 MT/s, CL52, 1.1 V and 2Rx8 registered ECC operation.
What exactly ships in the MR51200-4828K8 box and do I need any extra parts for the H14DSH?
The box contains eight 48GB DDR5-6400 288-pin ECC registered RDIMMs — nothing else is required; the motherboard supplies the slots and power.
My H14DSH manual lists several DDR5 speed bins — why choose this 6400 CL52 2Rx8 kit over a different one?
This kit matches the board's qualified 6400 MT/s, CL52, 1.1 V, 2Rx8 registered ECC specification so all eight slots populate at rated speed without down-clocking.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.00095212BTC
En stock