我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 384GB (8x48GB) DDR5-6400 CL52 2Rx8 ECC RDIMM Supermicro H14DSH

SKU CH-5EAF-7K8PQ

A 384 GB DDR5-6400 ECC RDIMM kit of eight 48 GB modules at CL52, 1.1 V, 2Rx8, validated for the Supermicro H14DSH motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from eight 48 GB modules for high-density server workloads
  • DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H14DSH
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 10 V operation matches the platform's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the board's memory slots exactly as specified

Exact-match upgrade kit

This 384GB kit contains eight 48GB DDR5-6400 PC5-51200 registered ECC RDIMMs built to CL52 timings at 1.1V. The modules use a 2Rx8 organization and 288-pin form factor that the Supermicro H14DSH memory controller expects for full-capacity recognition and rated-speed operation.

Installation and common issues

The RDIMMs insert into the board's 288-pin DDR5 slots like any registered DIMM, but the server manual defines the exact population sequence for eight modules. Deviating from that order or mixing ranks is the most frequent cause of a no-post condition or reduced capacity.

Pre-order verification

Confirm the H14DSH manual lists 48GB RDIMMs in an eight-DIMM configuration and note the required slot-filling order. Verify the BIOS revision supports this density at DDR5-6400 before ordering, because unsupported firmware will limit speed or prevent boot.

商品特色

  • 384 GB total capacity from eight 48 GB modules for high-density server workloads
  • DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H14DSH
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 10 V operation matches the platform's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the board's memory slots exactly as specified

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

商品問答

How do I confirm the 384GB kit is running at DDR5-6400 CL52 after installing it in my Supermicro H14DSH?

Check the BIOS memory information screen or a tool like dmidecode; each of the eight 48GB RDIMMs should report 6400 MT/s, CL52, 1.1 V and 2Rx8 registered ECC operation.

What exactly ships in the MR51200-4828K8 box and do I need any extra parts for the H14DSH?

The box contains eight 48GB DDR5-6400 288-pin ECC registered RDIMMs — nothing else is required; the motherboard supplies the slots and power.

My H14DSH manual lists several DDR5 speed bins — why choose this 6400 CL52 2Rx8 kit over a different one?

This kit matches the board's qualified 6400 MT/s, CL52, 1.1 V, 2Rx8 registered ECC specification so all eight slots populate at rated speed without down-clocking.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。