Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two green DDR5 UDIMM sticks, no heat spreaders, 96GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM for Supermicro X14SAZ-TLN4F memory upgrade

SKU CH-76KZ-KZHPA

A 96GB dual-channel DDR5 kit at 5600MHz CL46 built with major OEM chips for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 96GB 2X48GB

  • 96GB kit doubles memory headroom for demanding workloads
  • DDR5 5600 speed with CL46 timing matches board specs exactly
  • 2Rx8 dual-rank organisation maximises density on two slots
  • 1V standard voltage ensures stable operation without extra cooling
  • Major OEM chips from Samsung, Micron or Hynix deliver tested reliability

96GB DDR5 5600 kit for Supermicro X14SAZ-TLN4F

This 96GB kit contains two 48GB DDR5 UDIMM modules rated at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. It is built for the Supermicro X14SAZ-TLN4F motherboard and uses major OEM chips from Samsung, Micron or Hynix. The non-ECC unbuffered design matches the board's desktop memory controller.

288-pin UDIMM form factor and population rules

Each module is a 288-pin unbuffered DIMM with 2Rx8 organisation and no heat spreader. The kit follows the exact rank, voltage and timing the board expects so the memory controller recognises the full capacity at rated speed. Consult the motherboard manual for supported capacities and approved DIMM population order before installation.

Sustained stability at rated speed and voltage

Modules are tested for stability at 5600MHz, CL46 and 1.10V using major OEM components. The unbuffered design places signal integrity on the memory controller, so consistent airflow over the DIMM slots helps maintain error-free operation during long workloads. Lifetime replacement warranty and US-based technical support back the kit.

Puntos fuertes

  • 96GB kit doubles memory headroom for demanding workloads
  • DDR5 5600 speed with CL46 timing matches board specs exactly
  • 2Rx8 dual-rank organisation maximises density on two slots
  • 1V standard voltage ensures stable operation without extra cooling
  • Major OEM chips from Samsung, Micron or Hynix deliver tested reliability

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Does the 48 GB per module 2Rx8 density run at the rated DDR5 5600 CL46 without down-clocking on the Supermicro X14SAZ-TLN4F?

The kit is spec-matched to the board's memory-population rules and tested for stability at DDR5 5600 CL46 1.1 V, so the 2Rx8 modules are recognised at full capacity and speed.

How warm and loud do the bare modules get during all-day workloads without a heat spreader?

Running at 1.1 V the DRAM stays cool enough for passive airflow in a typical chassis; no fan is attached and the modules add no audible noise.

What motherboard slot and firmware support must already be present for this 288-pin DDR5 UDIMM kit to work?

A Supermicro X14SAZ-TLN4F with DDR5 5600 UDIMM slots and a BIOS that supports 48 GB 2Rx8 Non-ECC modules is required.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.