Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green DDR5 UDIMM sticks, no heat spreaders, 96GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM for Supermicro X14SAZ-TLN4F memory upgrade

SKU CH-76KZ-KZHPA

A 96GB dual-channel DDR5 kit at 5600MHz CL46 built with major OEM chips for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 96GB 2X48GB

  • 96GB kit doubles memory headroom for demanding workloads
  • DDR5 5600 speed with CL46 timing matches board specs exactly
  • 2Rx8 dual-rank organisation maximises density on two slots
  • 1V standard voltage ensures stable operation without extra cooling
  • Major OEM chips from Samsung, Micron or Hynix deliver tested reliability

96GB DDR5 5600 kit for Supermicro X14SAZ-TLN4F

This 96GB kit contains two 48GB DDR5 UDIMM modules rated at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. It is built for the Supermicro X14SAZ-TLN4F motherboard and uses major OEM chips from Samsung, Micron or Hynix. The non-ECC unbuffered design matches the board's desktop memory controller.

288-pin UDIMM form factor and population rules

Each module is a 288-pin unbuffered DIMM with 2Rx8 organisation and no heat spreader. The kit follows the exact rank, voltage and timing the board expects so the memory controller recognises the full capacity at rated speed. Consult the motherboard manual for supported capacities and approved DIMM population order before installation.

Sustained stability at rated speed and voltage

Modules are tested for stability at 5600MHz, CL46 and 1.10V using major OEM components. The unbuffered design places signal integrity on the memory controller, so consistent airflow over the DIMM slots helps maintain error-free operation during long workloads. Lifetime replacement warranty and US-based technical support back the kit.

Pontos fortes

  • 96GB kit doubles memory headroom for demanding workloads
  • DDR5 5600 speed with CL46 timing matches board specs exactly
  • 2Rx8 dual-rank organisation maximises density on two slots
  • 1V standard voltage ensures stable operation without extra cooling
  • Major OEM chips from Samsung, Micron or Hynix deliver tested reliability

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does the 48 GB per module 2Rx8 density run at the rated DDR5 5600 CL46 without down-clocking on the Supermicro X14SAZ-TLN4F?

The kit is spec-matched to the board's memory-population rules and tested for stability at DDR5 5600 CL46 1.1 V, so the 2Rx8 modules are recognised at full capacity and speed.

How warm and loud do the bare modules get during all-day workloads without a heat spreader?

Running at 1.1 V the DRAM stays cool enough for passive airflow in a typical chassis; no fan is attached and the modules add no audible noise.

What motherboard slot and firmware support must already be present for this 288-pin DDR5 UDIMM kit to work?

A Supermicro X14SAZ-TLN4F with DDR5 5600 UDIMM slots and a BIOS that supports 48 GB 2Rx8 Non-ECC modules is required.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.