BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278333BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 288GB 6x48GB CL52 1.1V Supermicro H14DSG-OM
A 288 GB DDR5 registered ECC kit of six 48 GB modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14DSG-OM motherboard
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 288 GB capacity across six 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency for high-throughput data processing
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption
- 1 V operation reduces power draw in fully populated configurations
- Verified fitment for Supermicro H14DSG-OM motherboard ensures full-speed recognition
Exact-match upgrade kit
This 288GB kit contains six 48GB DDR5 6400 RDIMMs built to the Supermicro H14DSG-OM memory controller specification. Registered ECC modules with 2Rx8 organisation and CL52 timing at 1.1V are recognised at full capacity and rated speed without manual tuning.
Enterprise stability features
Registered architecture buffers the command bus so all slots run fully populated while ECC corrects single-bit errors on the fly. These mechanisms prevent silent data corruption and unplanned reboots in production workloads.
288-pin RDIMM form factor
Modules use the standard DDR5 RDIMM connector required by the target motherboard, not UDIMM or SODIMM layouts. Population order and maximum supported capacity must be verified in the system manual before installation.
Puntos fuertes
- 288 GB capacity across six 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency for high-throughput data processing
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption
- 1 V operation reduces power draw in fully populated configurations
- Verified fitment for Supermicro H14DSG-OM motherboard ensures full-speed recognition
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
Will the six 48GB modules need any firmware updates or re-seating after installation in the H14DSG-OM?
The kit is built to the exact rank, voltage and timing the board expects so it is recognised at full capacity and rated speed on first boot; no firmware step is required.
What is the first limit reached when all six slots run continuously at DDR5-6400 CL52?
With 1.10 V registered ECC modules the memory controller thermal ceiling is reached before the DIMMs themselves throttle, so sustained throughput is bounded by the platform not the memory.
How much power do the six 2Rx8 sticks draw and what heat do they add when the server runs all day?
At 1.1 V the complete 288 GB kit consumes only a few watts per module, adding minimal heat and no audible noise since the RDIMMs have no heat spreaders or fans.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00280922BTC
En stock
