Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two green DDR4 ECC registered RDIMM modules with gold contacts

OWC

OWC 256GB (2x128GB) DDR4 2933 PC4-23400 CL21 8Rx4 288-pin 1.2V ECC Registered RDIMM memory upgrade

SKU CH-B6Q0-JBR5M

Two-module kit provides 256 GB of DDR4-2933 ECC registered RDIMM memory for PowerEdge C4140 servers with SkyLake CPUs

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 256GB (2 x 128GB)

Ver 4 configuraciones más
  • 256 GB total capacity from two 128 GB modules
  • ECC registered design detects and corrects memory errors
  • DDR4 2933 speed with CL21 latency for server workloads
  • 2 V operation reduces power draw in dense configurations
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Server memory upgrade

This kit provides 256 GB of DDR4 ECC registered memory in two 128 GB modules. It is built for the Dell PowerEdge C4140 with SkyLake processors. Workstations and servers that require registered DIMMs are the intended platforms. Standard desktop computers cannot use this memory.

Registered DIMM form factor

The 288-pin registered design adds a buffer that stabilises heavy memory loads in multi-socket servers. ECC circuitry detects and corrects single-bit errors to protect data integrity. Modules operate at 1.2 V without a heat spreader. They cannot be mixed with unbuffered or load-reduced DIMMs.

2933 MHz CL21 speed rating

Rated at DDR4 2933 (PC4-23400) with CAS latency 21, the kit also runs at 2133, 2400 or 2666 MHz if the system requires a lower speed. Buyers needing a different capacity, rank configuration or unbuffered memory must choose another product.

Puntos fuertes

  • 256 GB total capacity from two 128 GB modules
  • ECC registered design detects and corrects memory errors
  • DDR4 2933 speed with CL21 latency for server workloads
  • 2 V operation reduces power draw in dense configurations
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Especificaciones

BrandOWC
Part Number2R9D48R4256P
Capacity256GB (2 x 128GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank8Rx4
Heat SpreaderNo
Compatible SystemPowerEdge C4140 (SkyLake CPU)

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will DDR4 2933 PC4-23400 run at 2933 MHz or drop to 2666 MHz in a PowerEdge C4140?

The kit is rated DDR4 2933 PC4-23400; it will run at 2933 MHz if the platform supports that speed, otherwise it falls back to 2666 MHz, 2400 MHz or 2133 MHz.

Do the 288-pin RDIMMs fit the DIMM slots in a PowerEdge C4140?

Yes, the modules are 288-pin DDR4 ECC Registered RDIMMs, the form factor specified for the PowerEdge C4140.

What is the correct way to install the two 128 GB RDIMMs in a PowerEdge C4140?

Power down, open the chassis, align each module’s notch with the slot key, press firmly until the retention clips click; the common mistake is not seating both clips fully.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.