Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green 240-pin DDR3L ECC registered DIMM module

OWC

OWC 8GB DDR3L 1600 ECC Registered RDIMM 2Rx4 1.35V Cisco UCS C200 M2 C210 M2

SKU CH-D037-6NK20

8GB DDR3L 1600 ECC registered RDIMM for Cisco UCS C200 M2 and C210 M2 servers

  • Capacity8GB
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in servers
  • 35V DDR3L reduces power draw versus standard DDR3
  • 1600 MHz CL11 speed matches Cisco UCS C200 M2 and C210 M2 specs
  • Single 8 GB 2Rx4 module simplifies capacity upgrades
  • 240-pin RDIMM form factor fits validated workstation and server slots

Server-specific 8 GB DDR3L RDIMM

This 8 GB DDR3L 1600 registered ECC module is built for Cisco UCS C200 M2 and C210 M2 servers. It operates at 1.35 V with CL11 latency and a 2Rx4 organisation on a 240-pin form factor. The part targets administrators who need to expand memory capacity in those exact platforms.

Replaces Cisco UCSMR1X082RYA

The module serves as a direct replacement for the Cisco part number UCSMR1X082RYA. The upgrade is worthwhile when the server currently runs with fewer registered ECC DIMMs or when a failed stick must be swapped without mixing registered and unbuffered or load-reduced memory types.

Simple DIMM installation

Installation follows the standard 240-pin DIMM procedure: power down, open the chassis, align the notch, and press until the latches click. The main risk is inserting the module into a system that expects unbuffered or load-reduced memory, which will prevent boot or cause instability.

Puntos fuertes

  • ECC registered design protects data integrity in servers
  • 35V DDR3L reduces power draw versus standard DDR3
  • 1600 MHz CL11 speed matches Cisco UCS C200 M2 and C210 M2 specs
  • Single 8 GB 2Rx4 module simplifies capacity upgrades
  • 240-pin RDIMM form factor fits validated workstation and server slots

Especificaciones

BrandOWC
Part Number1R6T32R408GB
Capacity8GB
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS C200 M2
Cisco UCS C210 M2

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the 240-pin DDR3L RDIMM fit the memory slots in my Cisco UCS C200 M2 or C210 M2 server?

Yes, the module uses the standard 240-pin DDR3L RDIMM form factor required by both the C200 M2 and C210 M2.

What is the correct way to install this ECC registered DIMM, and what common mistake should I avoid?

Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, and press firmly until the retention clips lock; do not mix this registered ECC DIMM with unbuffered or load-reduced memory.

When will this 8GB DDR3L 1600 module need replacement, and what should I look for?

The module is built to JEDEC and RoHS standards with a limited lifetime warranty; replace it only if memory diagnostics report uncorrectable ECC errors or the server fails to recognise the DIMM at POST.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.