OWC 8GB DDR4 2133MHz CL15 1.2V 288pin UDIMM memory upgrade
- 8GB
- 288-Pin DDR4 Non-EC…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
8GB DDR4 2400 CL17 UDIMM compatible with HP ProDesk 400 G4 and 600 G3 systems
This 8GB DDR4 module is built for HP ProDesk 400 G4 SFF, 400 G4 Tower, 600 G3 SFF and 600 G3 Tower systems. It delivers a straightforward capacity increase for office workstations that need more memory headroom. The unbuffered UDIMM design fits standard desktop DIMM slots without requiring registered memory support. Buyers with other platforms or laptop SODIMM slots cannot use this part.
Operating at 1.2V, the module runs at the standard DDR4 voltage for low power draw and minimal heat output. No heat spreader is fitted, so airflow across the PCB handles cooling in typical chassis layouts. The CL17 latency at 2400MHz keeps timing overhead modest during sustained workloads. Noise is not a factor as the component has no moving parts.
The 288-pin DDR4 2400 PC4-19200 CL17 1.2V Non-ECC unbuffered 1Rx8 configuration determines fit and function. Systems must accept this exact speed, voltage, pin count and error-correction type. Backward compatibility with 2133MHz buses is supported. If your motherboard requires ECC, registered DIMMs, a different voltage or a different pin layout, this module will not work.
| Brand | OWC |
|---|---|
| Part Number | 2U4D41R808GB |
| Capacity | 8GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP ProDesk 400 G4 SFF HP ProDesk 400 G4 Tower HP ProDesk 600 G3 SFF HP ProDesk 600 G3 Tower |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Power off the PC, unplug it, open the case, align the notch on the module with the slot key, press firmly until both retention clips click shut, then power on and verify 2400 MHz operation in BIOS — the step most people miss is fully seating both clips.
No scheduled maintenance is required; the module has no heat spreader and no moving parts, so replacement is only necessary if a memory test reports errors or if you later expand beyond the board's maximum capacity.
The JEDEC-specified 1.2 V operating voltage and CL17 latency define the thermal and timing envelope; sustained loads stay within that envelope because the module is unbuffered and runs at standard desktop power levels.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?