Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green 288-pin DDR4 UDIMM module, black chips, no heat spreader

OWC

OWC 8GB DDR4 2400 CL17 1.2V 288pin Non-ECC UDIMM 2U4D41R808GB memory upgrade

SKU CH-8TKX-EJB1W

8GB DDR4 2400 CL17 UDIMM compatible with HP ProDesk 400 G4 and 600 G3 systems

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 8GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2400MHz speed with CL17 latency delivers responsive system performance
  • 2V low-voltage operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits HP ProDesk 400 G4 and 600 G3 desktops
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

Compatible HP ProDesk upgrade

This 8GB DDR4 module is built for HP ProDesk 400 G4 SFF, 400 G4 Tower, 600 G3 SFF and 600 G3 Tower systems. It delivers a straightforward capacity increase for office workstations that need more memory headroom. The unbuffered UDIMM design fits standard desktop DIMM slots without requiring registered memory support. Buyers with other platforms or laptop SODIMM slots cannot use this part.

Thermals and power profile

Operating at 1.2V, the module runs at the standard DDR4 voltage for low power draw and minimal heat output. No heat spreader is fitted, so airflow across the PCB handles cooling in typical chassis layouts. The CL17 latency at 2400MHz keeps timing overhead modest during sustained workloads. Noise is not a factor as the component has no moving parts.

Decisive specification

The 288-pin DDR4 2400 PC4-19200 CL17 1.2V Non-ECC unbuffered 1Rx8 configuration determines fit and function. Systems must accept this exact speed, voltage, pin count and error-correction type. Backward compatibility with 2133MHz buses is supported. If your motherboard requires ECC, registered DIMMs, a different voltage or a different pin layout, this module will not work.

Punti di forza

  • 8GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2400MHz speed with CL17 latency delivers responsive system performance
  • 2V low-voltage operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits HP ProDesk 400 G4 and 600 G3 desktops
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

Caratteristiche tecniche

BrandOWC
Part Number2U4D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G4 SFF
HP ProDesk 400 G4 Tower
HP ProDesk 600 G3 SFF
HP ProDesk 600 G3 Tower

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How do I install this 288-pin DDR4 UDIMM in an HP ProDesk 400 G4 SFF, and what step is often missed?

Power off the PC, unplug it, open the case, align the notch on the module with the slot key, press firmly until both retention clips click shut, then power on and verify 2400 MHz operation in BIOS — the step most people miss is fully seating both clips.

What maintenance or replacement will this 8 GB CL17 module need over its service life?

No scheduled maintenance is required; the module has no heat spreader and no moving parts, so replacement is only necessary if a memory test reports errors or if you later expand beyond the board's maximum capacity.

What limit appears first when this 1.2 V DDR4 2400 memory runs under sustained heavy workloads?

The JEDEC-specified 1.2 V operating voltage and CL17 latency define the thermal and timing envelope; sustained loads stay within that envelope because the module is unbuffered and runs at standard desktop power levels.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.