OWC 8GB DDR4 2133MHz CL15 1.2V 288pin UDIMM memory upgrade
- 8GB
- 288-Pin DDR4 Non-EC…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
8GB DDR4 2400 CL17 UDIMM compatible with HP ProDesk 400 G4 and 600 G3 systems
This 8GB DDR4 module is built for HP ProDesk 400 G4 SFF, 400 G4 Tower, 600 G3 SFF and 600 G3 Tower systems. It delivers a straightforward capacity increase for office workstations that need more memory headroom. The unbuffered UDIMM design fits standard desktop DIMM slots without requiring registered memory support. Buyers with other platforms or laptop SODIMM slots cannot use this part.
Operating at 1.2V, the module runs at the standard DDR4 voltage for low power draw and minimal heat output. No heat spreader is fitted, so airflow across the PCB handles cooling in typical chassis layouts. The CL17 latency at 2400MHz keeps timing overhead modest during sustained workloads. Noise is not a factor as the component has no moving parts.
The 288-pin DDR4 2400 PC4-19200 CL17 1.2V Non-ECC unbuffered 1Rx8 configuration determines fit and function. Systems must accept this exact speed, voltage, pin count and error-correction type. Backward compatibility with 2133MHz buses is supported. If your motherboard requires ECC, registered DIMMs, a different voltage or a different pin layout, this module will not work.
| Brand | OWC |
|---|---|
| Part Number | 2U4D41R808GB |
| Capacity | 8GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP ProDesk 400 G4 SFF HP ProDesk 400 G4 Tower HP ProDesk 600 G3 SFF HP ProDesk 600 G3 Tower |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Power off the PC, unplug it, open the case, align the notch on the module with the slot key, press firmly until both retention clips click shut, then power on and verify 2400 MHz operation in BIOS — the step most people miss is fully seating both clips.
No scheduled maintenance is required; the module has no heat spreader and no moving parts, so replacement is only necessary if a memory test reports errors or if you later expand beyond the board's maximum capacity.
The JEDEC-specified 1.2 V operating voltage and CL17 latency define the thermal and timing envelope; sustained loads stay within that envelope because the module is unbuffered and runs at standard desktop power levels.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม