暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 Server Memory

SKU CH-KYXD-6NCPX

16 GB DDR3L 1333 MHz ECC registered server DIMM with 1.35 V low-voltage operation

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR3L 1333MHz ECC RDIMM boosts server capacity
  • 35V low-voltage operation reduces power draw
  • Registered 2Rx4 design supports multi-module stability
  • CL9 latency delivers responsive data access
  • 240-pin DIMM fits compatible DDR3L server slots

What This Module Is

A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 Server Memory is a registered DIMM built for server and workstation platforms that require error-correcting code memory. It runs at 1333 MHz with CL9 latency and operates at 1.35V low voltage. The module uses a 240-pin form factor and carries a 2Rx4 rank configuration.

Who Should Buy This

This module suits administrators upgrading or repairing systems that specifically accept DDR3L 1333 ECC registered DIMMs with a 2Rx4 organisation. Buyers who need non-ECC unbuffered memory, a different voltage, a higher speed grade or a larger single-module capacity should look at other options.

Installation Notes

Installation follows the standard DIMM slot procedure: align the notch, press firmly until the retention clips engage, then verify detection in the system BIOS. The most common issues are mixing registered and unbuffered modules, populating slots in an unsupported sequence, or using a platform that does not support 1.35V DDR3L operation.

特長

  • 16GB DDR3L 1333MHz ECC RDIMM boosts server capacity
  • 35V low-voltage operation reduces power draw
  • Registered 2Rx4 design supports multi-module stability
  • CL9 latency delivers responsive data access
  • 240-pin DIMM fits compatible DDR3L server slots

仕様

BrandA-Tech
SeriesCompatible Replacement for Elpida
ModelEBJ17RG4EFWD-DJ-F
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesEBJ17RG4EFWD-DJ-F

この商品に関する質問

What type of motherboard slot is required for this 240-pin DDR3L RDIMM?

The module uses a standard 240-pin DDR3 DIMM slot, but the motherboard must support registered ECC memory and 1.35V DDR3L operation.

Will this 1.35V DDR3L module work in a system that only supports 1.5V DDR3?

DDR3L is backward compatible with 1.5V DDR3 slots and will run at the higher voltage if the platform does not support low-voltage operation.

How can I confirm the system recognises the full 16GB capacity and ECC function after installation?

Check the BIOS memory information or OS system properties for 16GB total capacity and verify ECC is reported as active or enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。