暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 ECC registered DIMMs, 288-pin, no heat spreaders

A-Tech

A-Tech 8GB (2x4GB) DDR4 2133 ECC RDIMM 1Rx8 CL15 1.2V server RAM

SKU CH-B6W0-C3MDW

An 8 GB dual-channel DDR4 2133 ECC registered DIMM kit for servers and workstations

  • Capacity8GB (2 x 4GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • Single-rank 1Rx8 layout enables higher-density configurations
  • DDR4 2133 speed with CL15 latency delivers responsive throughput
  • Dual-channel 2×4 GB kit doubles bandwidth over single modules

Server DDR4 kit for ECC workloads

This 8 GB kit contains two 4 GB registered DIMMs built for DDR4 servers and workstations that require error-correcting memory. Each module is a single-rank 1Rx8 design running at 2133 MHz with CL15 latency. The kit is not compatible with desktop or laptop platforms.

Sustained operation with registered buffering

The registered buffer reduces electrical load on the memory controller, helping stability during continuous multi-threaded workloads. ECC circuitry detects and corrects single-bit errors without halting the system. Standard 1.2 V operation keeps power draw predictable under load.

288-pin DDR4 ECC RDIMM form factor

Only systems that accept DDR4 288-pin registered ECC modules can use this kit. Buyers whose motherboards require unbuffered UDIMMs or a different DDR generation cannot install these modules.

特長

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • Single-rank 1Rx8 layout enables higher-density configurations
  • DDR4 2133 speed with CL15 latency delivers responsive throughput
  • Dual-channel 2×4 GB kit doubles bandwidth over single modules

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2133P-R
Part NumberAT4G2D4D2133RS8N12V
Capacity8GB (2 x 4GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 1.2 V registered ECC modules add noticeable heat or fan noise when the server runs continuously?

The kit operates at the standard DDR4 voltage of 1.20 V and has no heat spreader, so thermal output stays within normal DDR4 limits for registered DIMMs.

My motherboard has 288-pin DDR4 slots — is anything else required for these RDIMMs to work?

You need a server or workstation platform that explicitly supports DDR4 ECC registered memory; desktop and laptop boards will not accept these modules.

Can I mix this 1Rx8 CL15 kit with existing single-rank DDR4 ECC RDIMMs of a different capacity?

Mixing ranks and capacities is possible only if the system manual approves the specific population rules for your server or workstation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。