暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 RDIMM modules, 288-pin, no heat spreader

A-Tech

A-Tech 8GB (2x4GB) DDR4 2400 ECC RDIMM 1Rx8 server RAM

SKU CH-THRM-2B0A0

An 8 GB dual-channel DDR4 kit with ECC registered DIMMs at 2400 MHz for servers and workstations

  • Capacity8GB (2 x 4GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity for stable server operation
  • Dual-channel 8 GB kit increases memory bandwidth for demanding applications
  • Single-rank 1Rx8 modules allow higher density configurations on compatible platforms
  • Standard 1.2 V DDR4 voltage reduces power draw while maintaining 2400 MHz speed

A-Tech DDR4 2400 ECC RDIMM Kit

This 8GB dual-channel kit contains two 4GB registered DIMMs built for DDR4 servers and workstations. The modules run at 2400 MHz with CL17 latency and 1.20V operation. Error-correcting code and registered buffering protect data integrity in multi-socket platforms. Single-rank x8 organisation keeps electrical loading low on populated channels.

Verify DDR4 RDIMM support before ordering

Your motherboard must accept 288-pin DDR4 registered ECC modules at 2400 MHz. Desktop and laptop boards cannot use this memory. Check the system manual for maximum capacity per slot and approved population rules. Mixing registered and unbuffered DIMMs will prevent boot.

Fits multi-channel server architectures

Two single-rank modules populate a dual-channel pair without adding a second rank per channel. The 1.20V standard voltage works with common server power budgets. No heat spreader means standard airflow is sufficient. Registered signalling reduces load on the memory controller, freeing headroom for additional DIMMs in larger configurations.

特長

  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity for stable server operation
  • Dual-channel 8 GB kit increases memory bandwidth for demanding applications
  • Single-rank 1Rx8 modules allow higher density configurations on compatible platforms
  • Standard 1.2 V DDR4 voltage reduces power draw while maintaining 2400 MHz speed

仕様

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2400T-R
Part NumberAT4G2D4D2400RS8N12V
Capacity8GB (2 x 4GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the box and what else do I need to buy?

The box contains two 4 GB DDR4 ECC registered DIMMs. No extra components are required if your server or workstation has free 288-pin DDR4 slots and supports ECC RDIMM memory.

How do I choose between the listed versions or capacities?

This kit is a single 8 GB dual-channel option (2 x 4 GB, 1Rx8, CL17, 1.20 V). Select it when your system requires registered ECC DDR4 2400 modules in a matched pair.

What does the 2400 MHz rating mean once installed in a real machine?

The modules run at DDR4 2400 speed with CL17 latency at 1.20 V, delivering the rated throughput when the platform's memory controller is configured for that frequency.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。