暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 16GB (4x4GB) DDR3L 1333 ECC UDIMM 240-Pin 2Rx8 1.35V Server RAM

SKU CH-WBTA-S15G7

A 16 GB quad-channel DDR3L 1333 kit with ECC unbuffered DIMMs for servers and workstations

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

Speed DDR3L 1333 (PC3L 10600)

  • 16 GB quad-channel kit expands server memory capacity
  • DDR3L 1333 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Low-voltage 1.35 V operation reduces power draw
  • 240-pin DIMM form factor fits compatible server slots

Server DDR3L ECC kit

This 16 GB kit contains four 4 GB unbuffered ECC UDIMMs built for DDR3 and DDR3L servers and workstations. The modules run at 1333 MHz with CL9 latency and operate at 1.35 V, with support for 1.5 V where required. They are not compatible with desktop or laptop computers.

Capacity and headroom

The quad-channel kit provides 16 GB total capacity for multi-threaded server workloads such as virtualization, database caching and file serving. Dual-rank 2Rx8 organization helps fill memory channels efficiently, though the 1333 MHz speed limits bandwidth compared to faster DDR3L grades. Workloads needing more than 16 GB or higher throughput will exceed this kit.

DDR3L interface limits

The DDR3L 240-pin interface tops out at 1333 MHz (PC3L-10600) on this kit, capping theoretical bandwidth below later DDR3L speeds. ECC error correction adds reliability for mission-critical data but does not increase raw throughput. Systems must support unbuffered ECC UDIMMs at 1.35 V or 1.5 V; registered or non-ECC platforms will not accept these modules.

特長

  • 16 GB quad-channel kit expands server memory capacity
  • DDR3L 1333 MHz speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Low-voltage 1.35 V operation reduces power draw
  • 240-pin DIMM form factor fits compatible server slots

仕様

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3L-10600E
Capacity16GB (4 x 4GB)
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 1.35V DDR3L 1333 modules run reliably alongside existing 1.5V DDR3 sticks in the same server?

The kit is rated for both 1.35V and 1.5V operation, so it can match the voltage of your current DDR3 memory when installed in the same system.

How can I confirm the 2Rx8 ECC UDIMM kit is functioning correctly after installation?

Check the BIOS or UEFI to ensure all 16 GB are detected, ECC is shown as active, and the speed reads 1333 MHz; then run a memory diagnostic to verify error-correction logging.

What comes in the box and do I need any extra parts to install the four 240-pin DIMMs?

The package contains the four 4 GB DDR3L 1333 ECC UDIMM modules; no additional hardware is required for installation in compatible 240-pin DIMM slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。