EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
8GB DDR4 2400MHz ECC UDIMM server memory module with CL17 latency and 1.20V operation
This 8GB DDR4 2400 ECC UDIMM module targets administrators who need to add reliable memory to compatible servers or workstations. It delivers error-correcting code protection without registered buffering. The unbuffered design suits platforms that accept UDIMM population rules.
The module is a direct equivalent for the Hynix HMA41GU7AFR8N-UH part number. Upgrading makes sense when a system currently runs lower-capacity DDR4 ECC UDIMMs at 2400 MT/s and the board supports 2Rx8 organisation. Verify the platform's qualified-vendor list before ordering.
Installation requires an available 288-pin DDR4 DIMM slot that accepts unbuffered ECC memory at 1.20V. The single 8GB stick leaves remaining slots free for further expansion within the motherboard's maximum capacity. Confirm the system's supported rank and speed configuration before installation.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
It fits a standard DDR4 DIMM slot with 288 pins and operates at 1.20 V.
Align the single off-centre notch with the slot key, press straight down until both side clips click, and verify the module sits flush.
Replace the module if the system logs show a rising correctable-error count or if memory diagnostics report persistent failures.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
No language matches that.
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?