Antec C8 PC Case — E-ATX Full Tower, Dual-Chamber, 270° Seamless Glass, 360 mm Radiator Support
- E-ATX Full Tower Ca…
- Black
Antec
Full-tower E-ATX chassis with dual-chamber layout, wooden front panel and curved tempered glass, supporting 360 mm radiators top, bottom and side plus 440 mm graphics cards
Options C8 Curve Wood
The Antec C8 Curve Wood is a full-tower chassis with a dual-chamber layout that separates the GPU and CPU from the power supply and drives. A 4mm curved tempered-glass front panel and a real wood accent give it a distinct look for living-room or workstation setups. It accepts ATX, E-ATX, Micro-ATX and ITX motherboards, including back-connect designs. Toolless panels simplify assembly and maintenance.
Internal storage is limited to one 3.5-inch bay and two 2.5-inch bays, so builders who want more storage will need external solutions. Fan mounts support three 120mm or two 160mm fans at the top and bottom, three 120mm or two 140mm fans on the side, plus a single 120mm or 140mm rear fan. Radiators up to 360mm fit top, bottom and side, while the rear takes a 120mm unit. The CPU cooler clearance is 175mm.
Graphics cards up to 440mm long are supported, covering most RTX models. Power supplies are restricted to 210mm in length, which excludes some longer high-wattage units. The chassis is built from 0.8mm and 1.0mm high-strength steel with a seamless glass edge. No fans are pre-installed, so airflow must be planned from scratch.
| Brand | Antec |
|---|---|
| Model | C8 Curve Wood |
| Type | E-ATX Full Tower Case |
| Color | Black |
| Case Material | Curved Glass/Tempered glass/Seamless glass edge/Dual Chamber/Wood Material |
| Motherboard Compatibility | ATX (Back Connect) / E-ATX / ITX / Micro ATX |
| Side Panel | 4mm Tempered Glass |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 8 |
| Fan Options | Bottom - 2 x 160mm / Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Rear - 1 x 140mm / Side - 2 x 140mm / Side - 3 x 120mm / Top - 2 x 160mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | No Fan Installed |
| Radiator Options | Bottom - Up to 360mm / Rear - Up to 120mm / Side - Up to 360mm / Top - Up to 360mm |
| Max GPU Length | 440 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 210 mm |
| 配送重量 | 13.54 kg |
| 梱包サイズ | 565 × 540 × 389 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The case supports E-ATX boards and graphics cards up to 440 mm long, so your current hardware will fit.
Check that intake fans on the bottom and side pull cool air through the mesh into the GPU chamber while top and rear fans exhaust heat from the CPU chamber.
No fans are pre-installed; you will need to purchase 120 mm, 140 mm or 160 mm fans for the top, bottom, side and rear mounts.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?