Antec C8 PC Case — E-ATX Full Tower, Dual-Chamber, 270° Seamless Glass, 360 mm Radiator Support
- E-ATX Full Tower Ca…
- Black
Antec
Full-tower E-ATX chassis with dual-chamber layout, wooden front panel and curved tempered glass, supporting 360 mm radiators top, bottom and side plus 440 mm graphics cards
Options C8 Curve Wood
The Antec C8 Curve Wood is a full-tower chassis with a dual-chamber layout that separates the GPU and CPU from the power supply and drives. A 4mm curved tempered-glass front panel and a real wood accent give it a distinct look for living-room or workstation setups. It accepts ATX, E-ATX, Micro-ATX and ITX motherboards, including back-connect designs. Toolless panels simplify assembly and maintenance.
Internal storage is limited to one 3.5-inch bay and two 2.5-inch bays, so builders who want more storage will need external solutions. Fan mounts support three 120mm or two 160mm fans at the top and bottom, three 120mm or two 140mm fans on the side, plus a single 120mm or 140mm rear fan. Radiators up to 360mm fit top, bottom and side, while the rear takes a 120mm unit. The CPU cooler clearance is 175mm.
Graphics cards up to 440mm long are supported, covering most RTX models. Power supplies are restricted to 210mm in length, which excludes some longer high-wattage units. The chassis is built from 0.8mm and 1.0mm high-strength steel with a seamless glass edge. No fans are pre-installed, so airflow must be planned from scratch.
| Brand | Antec |
|---|---|
| Model | C8 Curve Wood |
| Type | E-ATX Full Tower Case |
| Color | Black |
| Case Material | Curved Glass/Tempered glass/Seamless glass edge/Dual Chamber/Wood Material |
| Motherboard Compatibility | ATX (Back Connect) / E-ATX / ITX / Micro ATX |
| Side Panel | 4mm Tempered Glass |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 8 |
| Fan Options | Bottom - 2 x 160mm / Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Rear - 1 x 140mm / Side - 2 x 140mm / Side - 3 x 120mm / Top - 2 x 160mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | No Fan Installed |
| Radiator Options | Bottom - Up to 360mm / Rear - Up to 120mm / Side - Up to 360mm / Top - Up to 360mm |
| Max GPU Length | 440 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 210 mm |
| 배송 무게 | 13.54 kg |
| 포장 크기 | 565 × 540 × 389 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The case supports E-ATX boards and graphics cards up to 440 mm long, so your current hardware will fit.
Check that intake fans on the bottom and side pull cool air through the mesh into the GPU chamber while top and rear fans exhaust heat from the CPU chamber.
No fans are pre-installed; you will need to purchase 120 mm, 140 mm or 160 mm fans for the top, bottom, side and rear mounts.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?