EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Axiom
16GB DDR3 1600 ECC registered DIMM running at 1.35V for server stability
This Axiom 7104199-AX module provides 16 GB of DDR3 SDRAM built for servers and workstations that require registered ECC memory. It operates at 1600 MHz with a 1.35 V supply and uses the standard 240-pin DIMM form factor.
The module implements registered signal processing combined with error-correcting code to reduce electrical load on the memory controller and detect single-bit errors. This configuration is mandatory for platforms that will not boot with unbuffered or non-ECC DIMMs.
Running at 1.35 V lowers power draw and heat output compared with standard 1.5 V DDR3, helping system fans run quieter under typical server workloads. The 157.5 mil thickness fits standard DIMM slots without clearance issues.
| Brand | Axiom |
|---|---|
| Model | 7104199-AX |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| 配送重量 | 0.09 kg |
| 梱包サイズ | 152 × 76 × 25 mm |
The module provides 16 GB of DDR3 capacity with error-correcting code and a register that reduces electrical load on the memory controller, allowing higher-density configurations in compatible servers.
The DDR3 1600 speed rating sets the maximum data transfer rate at 1600 MT/s; actual throughput depends on the memory controller, channel population and BIOS settings of the host system.
It requires a standard 240-pin DDR3 DIMM socket and fits within a 157.5 mil board thickness, so it will seat in any server board designed for registered DDR3 DIMMs of that height.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?