暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Brute Networks

Brute Networks 8GB DDR4-2933 ECC Registered RDIMM 1Rx8 1.2V Dell AA937599

SKU CH-MHRG-KEW4G

8GB DDR4-2933 ECC registered RDIMM with 1.2V operation and Dell AA937599 compatibility

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 2 V operation lowers power draw per module
  • 288-pin DDR4-2933 form factor fits Dell AA937599 slots directly
  • Major-brand Samsung, SK Hynix or Micron chips ensure consistent quality

Dell-Compatible 8GB DDR4-2933 ECC RDIMM

This is an 8GB DDR4-2933 registered DIMM built with ECC for data integrity in server environments. It operates at 1.2V using a 288-pin interface and a 1Rx8 organisation. The module matches Dell part number AA937599 and uses major-brand DRAM chips from Samsung, SK Hynix or Micron. It is sold new with a lifetime warranty.

Server Builders Needing Single-Rank ECC Registered

This module suits administrators expanding or repairing Dell PowerEdge systems that require registered ECC DDR4 at 2933 MT/s. It is not for desktop PCs or laptops that accept only unbuffered non-ECC memory. It is also not for platforms needing higher capacities, dual-rank configurations or faster speeds than PC4-23400.

2933 MT/s Registered ECC at 1.2V

The decisive specification is the DDR4-2933 registered ECC rating at 1.2V in a 288-pin RDIMM form factor. Your server’s memory controller and BIOS must support this exact speed, voltage and registered signalling. If the platform requires a different speed, voltage or unbuffered modules, this part will not function.

特長

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 2 V operation lowers power draw per module
  • 288-pin DDR4-2933 form factor fits Dell AA937599 slots directly
  • Major-brand Samsung, SK Hynix or Micron chips ensure consistent quality

仕様

BrandDell
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

この商品に関する質問

Does my server need a 288-pin DDR4 slot to install this 8GB RDIMM?

Yes, the module uses a 288-pin DDR4 interface and requires a compatible registered DIMM slot.

Can I mix this 2933 MHz registered ECC module with older DDR4 RDIMMs running at a lower speed?

The system will downclock all modules to the slowest installed speed while maintaining ECC and registered operation.

How can I verify the module is running at PC4-23400 with ECC active after installation?

Check the BIOS memory information or OS tools such as dmidecode to confirm 2933 MT/s, registered mode and ECC enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。