SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501664BTC
재고 있음
Brute Networks
Brute Networks 8GB DDR4-2933 ECC Registered RDIMM 1Rx8 1.2V Dell AA937599
8GB DDR4-2933 ECC registered RDIMM with 1.2V operation and Dell AA937599 compatibility
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2933 (PC4 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- ECC protection prevents data corruption in critical workloads
- Registered design stabilises signal integrity for dense server configurations
- 2 V operation lowers power draw per module
- 288-pin DDR4-2933 form factor fits Dell AA937599 slots directly
- Major-brand Samsung, SK Hynix or Micron chips ensure consistent quality
Dell-Compatible 8GB DDR4-2933 ECC RDIMM
This is an 8GB DDR4-2933 registered DIMM built with ECC for data integrity in server environments. It operates at 1.2V using a 288-pin interface and a 1Rx8 organisation. The module matches Dell part number AA937599 and uses major-brand DRAM chips from Samsung, SK Hynix or Micron. It is sold new with a lifetime warranty.
Server Builders Needing Single-Rank ECC Registered
This module suits administrators expanding or repairing Dell PowerEdge systems that require registered ECC DDR4 at 2933 MT/s. It is not for desktop PCs or laptops that accept only unbuffered non-ECC memory. It is also not for platforms needing higher capacities, dual-rank configurations or faster speeds than PC4-23400.
2933 MT/s Registered ECC at 1.2V
The decisive specification is the DDR4-2933 registered ECC rating at 1.2V in a 288-pin RDIMM form factor. Your server’s memory controller and BIOS must support this exact speed, voltage and registered signalling. If the platform requires a different speed, voltage or unbuffered modules, this part will not function.
주요 특징
- ECC protection prevents data corruption in critical workloads
- Registered design stabilises signal integrity for dense server configurations
- 2 V operation lowers power draw per module
- 288-pin DDR4-2933 form factor fits Dell AA937599 slots directly
- Major-brand Samsung, SK Hynix or Micron chips ensure consistent quality
사양
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
이 상품에 대한 질문
Does my server need a 288-pin DDR4 slot to install this 8GB RDIMM?
Yes, the module uses a 288-pin DDR4 interface and requires a compatible registered DIMM slot.
Can I mix this 2933 MHz registered ECC module with older DDR4 RDIMMs running at a lower speed?
The system will downclock all modules to the slowest installed speed while maintaining ECC and registered operation.
How can I verify the module is running at PC4-23400 with ECC active after installation?
Check the BIOS memory information or OS tools such as dmidecode to confirm 2933 MT/s, registered mode and ECC enabled.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
