Enfain
Enfain OM3 LC-SC Duplex Multimode Fibre Optic Cable 10m Aqua Blue
A 10m OM3 duplex multimode cable with LC to SC connectors, 3.0mm jacket, 850nm wavelength and typical insertion loss of .2dB
- Low-loss links with typical 0.2 dB insertion loss
- High signal integrity from return loss exceeding 38 dB
- Reliable 10 Gbit multimode performance at 850 nm wavelength
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Wide operating range from -20 °C to +60 °C
Enfain OM3 LC-SC Duplex Patch Cable
This ten-metre multimode fibre patch cord uses an OM3 10-gigabit core with LC and SC connectors. The aqua-blue 3.0 mm PVC jacket protects ceramic ferrules that operate at an 850 nm wavelength. Typical insertion loss is .2 dB and maximum insertion loss is .3 dB while return loss exceeds 38 dB. The cable is rated for 1000 mating cycles and an operating range of -20 °C to +60 °C.
Suits 10G and 40G short-reach links.
The duplex LC-SC construction fits switches, servers and data-centre patch panels that require multimode connectivity at 1G, 10G or 40G speeds. Installers needing single-mode fibre, longer distances beyond OM3 reach, or different connector polishes should select another cable type. The 330 mm minimum bend radius also means very tight routing paths are unsuitable.
Fits standard LC and SC ports.
The 3.0 mm diameter allows dense patch-panel layouts without blocking adjacent ports. Ceramic ferrules maintain low loss over repeated insertions, reducing the need for frequent cleaning or replacement. No external power or active components are required, so the cable simply connects compatible transceivers on both ends.
特長
- Low-loss links with typical 0.2 dB insertion loss
- High signal integrity from return loss exceeding 38 dB
- Reliable 10 Gbit multimode performance at 850 nm wavelength
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Wide operating range from -20 °C to +60 °C
仕様
この商品の仕様はまだ公開されていません。
このモデルの他のバージョン
同シリーズにさらに 5点
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
この商品に関する質問
What patch-panel or transceiver ports must I already have to connect this LC-SC duplex cable?
You need one LC duplex port and one SC duplex port on your switches, servers or patch panels; the cable mates directly with both connector types.
Will this OM3 10-gigabit core cable work with older 1 Gbit multimode equipment running at 850 nm?
Yes, the OM3 core is fully backward-compatible with 1 Gbit links at 850 nm, so legacy gear stays usable.
How can I verify the link is performing within spec after installation?
Measure insertion loss with a light source and power meter at 850 nm; a reading of 0.2 dB typical or 0.3 dB maximum confirms the cable meets its rated performance.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








