暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular metal backplane kit with SAS SATA connectors for DL360 Gen10 server

HPE

HPE 867966-B21 DL360 Gen10 2SFF SAS/SATA backplane kit

SKU CH-5M5H-B8D06 MPN 867966-B21

Adds two small-form-factor SAS or SATA drive bays to a ProLiant DL360 Gen10 server

  • Adds two 2.5-inch drive bays to DL360 Gen10
  • Supports both SAS and SATA drive interfaces
  • Compact kit measures 12.7 x 16.51 x 2.54 cm
  • Lightweight at 0.68 kg for easy installation
  • Purpose-built for HPE ProLiant DL360 Gen10 server

HPE DL360 Gen10 2SFF Backplane Kit

This kit adds a 2SFF SAS/SATA backplane to a ProLiant DL360 Gen10 server. It provides the hardware needed to install two small-form-factor drives using SAS or SATA interfaces. The part is supplied new and matches HPE part number 867966-B21.

Who This Suits and Who It Does Not

The kit suits administrators expanding internal storage on a compatible DL360 Gen10 chassis. It does not suit buyers who need a different drive count or a different server model. It also does not suit systems that lack the required backplane mounting points or cabling.

Deciding Specification — SAS/SATA Interface

The backplane supports SAS and SATA drives only, so drive selection must match those interfaces. The kit occupies the 2SFF front bay and weighs 0.68 kg. Verify that the server configuration includes the necessary drive cages and cables before ordering.

特長

  • Adds two 2.5-inch drive bays to DL360 Gen10
  • Supports both SAS and SATA drive interfaces
  • Compact kit measures 12.7 x 16.51 x 2.54 cm
  • Lightweight at 0.68 kg for easy installation
  • Purpose-built for HPE ProLiant DL360 Gen10 server

仕様

BrandHPE
SeriesProLiant DL360 G10
Model867966-B21
配送重量0.64 kg
梱包サイズ255 × 225 × 70 mm

この商品に関する質問

What chassis dimensions does the 2SFF backplane kit occupy in the DL360 Gen10?

The kit measures 12.7 x 16.51 x 2.54 cm and fits the standard front drive cage area of the server.

How is the 867966-B21 backplane connected to the system board during installation?

Align the SAS/SATA connector on the backplane with the system board header and press firmly until the latch clicks; the step often missed is securing the retention screw after seating.

When should the SAS/SATA backplane be replaced in a DL360 Gen10?

Replace it if drive LEDs stay amber, the controller reports persistent link errors on multiple bays, or the backplane shows physical damage such as bent pins.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。