暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SATA enterprise SSD with black label

Intel

Intel DC S3710 SSDSC2BA012T401 2.5" 1.2TB SATA enterprise SSD

SKU CH-7TQR-W3EP4 MPN SSDSC2BA012T401

Enterprise 2.5" SATA SSD with 1.2TB MLC capacity, 550 MB/s read, 520 MB/s write and AES 256-bit encryption

  • Form Factor2.5"
  • Capacity1.2TB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Max Sequential ReadUp to 550 MBps
  • Max Sequential WriteUp to 520 MBps

Options 1.2TB

  • Enterprise storage capacity with 1.2TB for demanding workloads
  • Fast sequential performance up to 550 MB/s read and 520 MB/s write
  • High random IOPS reaching 85,000 read and 45,000 write for transactional tasks
  • Low latency operation at 55 µs read and 66 µs write for responsive access
  • Data protection with AES 256-bit encryption and end-to-end safeguards

Capacity and form factor

The Intel DC S3710 SSDSC2BA012T401 is a 2.5-inch enterprise solid-state drive with a 1.2TB capacity. It uses a SATA III interface and MLC memory components for consistent performance in server and storage arrays. The drive is suited for read-intensive workloads requiring high endurance and data integrity.

Upgrade path and justification

This drive replaces mechanical hard drives or lower-endurance SSDs in 2.5-inch SATA bays. The jump is worth it when workloads demand up to 550 MBps sequential reads, 520 MBps sequential writes, and 85,000 random read IOPS with a 2,000,000-hour MTBF. It adds AES 256-bit hardware encryption and enhanced power-loss data protection.

SATA interface limits

The SATA III interface caps maximum throughput at 6 Gbps, limiting sequential speeds to the rated 550 MBps read and 520 MBps write. Random write performance tops out at 45,000 IOPS. Latency sits at 55 µs read and 66 µs write. Active power draw reaches 6.9W within a 0°C to 70°C operating range.

特長

  • Enterprise storage capacity with 1.2TB for demanding workloads
  • Fast sequential performance up to 550 MB/s read and 520 MB/s write
  • High random IOPS reaching 85,000 read and 45,000 write for transactional tasks
  • Low latency operation at 55 µs read and 66 µs write for responsive access
  • Data protection with AES 256-bit encryption and end-to-end safeguards

仕様

BrandIntel
SeriesDC S3710
ModelSSDSC2BA012T401
Form Factor2.5"
Capacity1.2TB
Memory ComponentsMLC
InterfaceSATA III
Max Sequential ReadUp to 550 MBps
Max Sequential WriteUp to 520 MBps
4KB Random ReadUp to 85,000 IOPS
4KB Random WriteUp to 45,000 IOPS
Read Latency55 µs
Write Latency66 µs
MTBF2,000,000 hours
FeaturesLithography Type: 20 nm
Enhanced Power Loss Data Protection
Hardware Encryption: AES 256 bit
High Endurance Technology (HET)
Temperature Monitoring and Logging
End-to-End Data Protection
Power Consumption (Idle)0.6W
Power Consumption (Active)6.9W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1000 G / 0.5ms
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz)
Non-Operating: 3.13 GRMS (5 - 800 Hz)
Height7.00mm
Weight94g
配送重量0.45 kg
梱包サイズ178 × 152 × 51 mm

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 2.5-inch form factor fit my server bay?

The drive uses a standard 2.5-inch form factor with SATA connectors, matching common server and laptop bays designed for this size.

How is the Intel DC S3710 installed, and what step is often missed?

Connect the SATA data and power cables, secure the drive in the bay, then enable AHCI mode in the system BIOS so the SATA III interface operates at full speed.

When will the 1.2TB MLC drive need replacement?

With a 2,000,000-hour MTBF and high-endurance MLC NAND, the SSD is rated for years of continuous operation; monitor SMART attributes for media wear or reallocated sectors to plan replacement.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。