暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three white 120mm square case fans with reverse blades ARGB lighting and daisy chain connectors

Jungle Leopard

Jungle Leopard Galaxy 120mm Reverse Blade ARGB PWM Case Fan 3 Pack White

SKU CH-0TF7-EE674

Three white 120 mm case fans with reverse blades, hydraulic bearings, 5 V ARGB lighting and PWM control up to 2000 RPM

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Reverse

  • Daisy-chain interlocking pins cut cable clutter to one lead per cluster
  • Hydraulic bearing plus eight damping pads keep noise at 29DBA
  • Bionic reverse-blade geometry delivers 62.36CFM airflow and 2.21mmAq pressure
  • 5V ARGB syncs with major motherboard software for 16 million colours
  • PWM curve runs 800-2000RPM matching CPU temperature automatically

Three-Fan ARGB Kit

This pack contains three 120 mm case fans with hydraulic bearings and a 25 mm frame. Each unit spins at up to 2000 RPM and delivers 62.36 CFM of airflow at 2.21 mmAq static pressure. The 4-pin PWM connector allows speed control between 800 and 2000 RPM. Addressable RGB lighting runs on a standard 5 V 3-pin header.

Builders Needing Simple Cable Runs

The daisy-chain slide-in locking system lets the three fans share a single power and signal cable, reducing internal clutter. Users who want independent fan curves per unit or who rely on 12 V RGB headers should consider a different kit. The white frame and black blades suit light-themed builds but may clash with all-black interiors.

Daisy-Chain and ARGB Sync

Interlocking pins join the fans mechanically and electrically, so only one cable reaches the motherboard. PWM control adjusts speed automatically with CPU temperature, while 5 V ARGB sync works with major board vendors for 16 million colours. Hydraulic bearings and eight damping pads keep noise at 29 dBA.

特長

  • Daisy-chain interlocking pins cut cable clutter to one lead per cluster
  • Hydraulic bearing plus eight damping pads keep noise at 29DBA
  • Bionic reverse-blade geometry delivers 62.36CFM airflow and 2.21mmAq pressure
  • 5V ARGB syncs with major motherboard software for 16 million colours
  • PWM curve runs 800-2000RPM matching CPU temperature automatically

仕様

BrandJungle Leopard
SeriesGalaxy
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM2000RPM
Air Flow62.36CFM
Air Pressure2.21 mmAq
Noise Level29DBA
Power Connector4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Do I need a 5V 3-pin ARGB header on my motherboard to control the lighting on these three fans?

Yes, the fans use a 5V 3-pin ARGB connector and require a compatible motherboard header or controller for 16 million colour synchronisation.

Will the 4-pin PWM connectors on these fans work with a motherboard that only has 3-pin fan headers?

The 4-pin PWM plugs fit 3-pin headers and will run, but speed will be voltage-controlled rather than PWM-regulated between 800 and 2000 RPM.

How can I confirm the daisy-chain interlock is seated correctly after installation?

Each fan clicks into the next via the slide-in pin mechanism; a single cable runs the whole cluster, and all three fans spin and light together when powered.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。