暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three square black 120mm case fans with ARGB lighting and hydraulic bearings, 25mm thick, daisy-chain design, 4-pin PWM connectors

Jungle Leopard

Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black

SKU CH-VF9A-K1HW1

Three 120 mm PWM fans with hydraulic bearings, 5 V ARGB lighting and daisy-chain cabling deliver 62.36 CFM at 29 dBA

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black Forward

  • Daisy-chain installation cuts cable clutter with slide-in interlocking design
  • Hydraulic bearing and eight damping pads keep noise at 29DBA
  • Bio-inspired blades deliver 62.36CFM airflow and 2.21mmAq pressure
  • 5V ARGB sync across major motherboards enables 16 million colours
  • PWM control adjusts 800–2000RPM automatically for efficient cooling

Three-fan ARGB PWM kit

This pack contains three 120 mm case fans with hydraulic bearings and addressable RGB lighting. Each unit spins up to 2000 RPM while producing 62.36 CFM of airflow and 2.21 mmAq of static pressure. The 4-pin PWM connector allows the motherboard to vary speed between 800 and 2000 RPM based on temperature. Noise is rated at 29 dBA at full speed.

Daisy-chain interlock system

The slide-in pin-to-pin mechanism links fans together so only one cable runs from the cluster to the motherboard. This reduces internal wiring clutter and shortens installation time compared with routing separate leads for every fan. Eight rubber damping pads on each frame absorb vibration to keep the 29 dBA figure consistent in practice. The 5 V 3-pin ARGB header synchronises 16 million colours across supported motherboards.

120 mm standard constraints

At 25 mm thick the fans fit typical 120 mm mounting points but will not suit slim chassis that require thinner profiles. The 5 V ARGB header must be present on the motherboard; older 12 V 4-pin RGB connectors cannot drive the lighting. PWM control needs a 4-pin fan header; 3-pin voltage control will not enable the 800 to 2000 RPM range. Hydraulic bearings tolerate horizontal or vertical orientation but are not rated for liquid-cooling radiators.

特長

  • Daisy-chain installation cuts cable clutter with slide-in interlocking design
  • Hydraulic bearing and eight damping pads keep noise at 29DBA
  • Bio-inspired blades deliver 62.36CFM airflow and 2.21mmAq pressure
  • 5V ARGB sync across major motherboards enables 16 million colours
  • PWM control adjusts 800–2000RPM automatically for efficient cooling

仕様

BrandJungle Leopard
SeriesGalaxy
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM2000RPM
Air Flow62.36CFM
Air Pressure2.21 mmAq
Noise Level29DBA
Power Connector4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How long does the hydraulic bearing last before it needs replacement?

The hydraulic bearing is rated for long service life; routine dust removal from the blades and frame every few months keeps airflow at 62.36 CFM and noise at 29 dBA.

What limits continuous operation at the 2000 RPM maximum speed?

PWM control caps speed at 2000 RPM; sustained loads stay within the 2.21 mmAq pressure rating while the 4-pin connector regulates voltage and current.

How much noise and heat does the 3-pack produce when running all day?

Each fan runs at 29 dBA; three fans together add minimal case heat because the PWM curve drops speed to 800 RPM when temperatures allow.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。