我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Jungle Leopard

Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3-Pack Black

SKU CH-VF9A-K1HW1

Three 120 mm PWM fans with hydraulic bearings, 5 V ARGB lighting and daisy-chain cabling deliver 62.36 CFM at 29 dBA

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black Forward

  • Daisy-chain installation cuts cable clutter with slide-in interlocking design
  • Hydraulic bearing and eight damping pads keep noise at 29DBA
  • Bio-inspired blades deliver 62.36CFM airflow and 2.21mmAq pressure
  • 5V ARGB sync across major motherboards enables 16 million colours
  • PWM control adjusts 800–2000RPM automatically for efficient cooling

Three-fan ARGB PWM kit

This pack contains three 120 mm case fans with hydraulic bearings and addressable RGB lighting. Each unit spins up to 2000 RPM while producing 62.36 CFM of airflow and 2.21 mmAq of static pressure. The 4-pin PWM connector allows the motherboard to vary speed between 800 and 2000 RPM based on temperature. Noise is rated at 29 dBA at full speed.

Daisy-chain interlock system

The slide-in pin-to-pin mechanism links fans together so only one cable runs from the cluster to the motherboard. This reduces internal wiring clutter and shortens installation time compared with routing separate leads for every fan. Eight rubber damping pads on each frame absorb vibration to keep the 29 dBA figure consistent in practice. The 5 V 3-pin ARGB header synchronises 16 million colours across supported motherboards.

120 mm standard constraints

At 25 mm thick the fans fit typical 120 mm mounting points but will not suit slim chassis that require thinner profiles. The 5 V ARGB header must be present on the motherboard; older 12 V 4-pin RGB connectors cannot drive the lighting. PWM control needs a 4-pin fan header; 3-pin voltage control will not enable the 800 to 2000 RPM range. Hydraulic bearings tolerate horizontal or vertical orientation but are not rated for liquid-cooling radiators.

商品特色

  • Daisy-chain installation cuts cable clutter with slide-in interlocking design
  • Hydraulic bearing and eight damping pads keep noise at 29DBA
  • Bio-inspired blades deliver 62.36CFM airflow and 2.21mmAq pressure
  • 5V ARGB sync across major motherboards enables 16 million colours
  • PWM control adjusts 800–2000RPM automatically for efficient cooling

商品規格

BrandJungle Leopard
SeriesGalaxy
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM2000RPM
Air Flow62.36CFM
Air Pressure2.21 mmAq
Noise Level29DBA
Power Connector4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

其他版本

同系列還有 3 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How long does the hydraulic bearing last before it needs replacement?

The hydraulic bearing is rated for long service life; routine dust removal from the blades and frame every few months keeps airflow at 62.36 CFM and noise at 29 dBA.

What limits continuous operation at the 2000 RPM maximum speed?

PWM control caps speed at 2000 RPM; sustained loads stay within the 2.21 mmAq pressure rating while the 4-pin connector regulates voltage and current.

How much noise and heat does the 3-pack produce when running all day?

Each fan runs at 29 dBA; three fans together add minimal case heat because the PWM curve drops speed to 800 RPM when temperatures allow.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。