Jungle Leopard Galaxy 120mm ARGB PWM Case Fan 3 Pack White
- 3 Fans
- Case Fan
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Jungle Leopard
Three 120 mm PWM fans with hydraulic bearings, 5 V ARGB lighting and daisy-chain cabling deliver 62.36 CFM at 29 dBA
Color Black Forward
This pack contains three 120 mm case fans with hydraulic bearings and addressable RGB lighting. Each unit spins up to 2000 RPM while producing 62.36 CFM of airflow and 2.21 mmAq of static pressure. The 4-pin PWM connector allows the motherboard to vary speed between 800 and 2000 RPM based on temperature. Noise is rated at 29 dBA at full speed.
The slide-in pin-to-pin mechanism links fans together so only one cable runs from the cluster to the motherboard. This reduces internal wiring clutter and shortens installation time compared with routing separate leads for every fan. Eight rubber damping pads on each frame absorb vibration to keep the 29 dBA figure consistent in practice. The 5 V 3-pin ARGB header synchronises 16 million colours across supported motherboards.
At 25 mm thick the fans fit typical 120 mm mounting points but will not suit slim chassis that require thinner profiles. The 5 V ARGB header must be present on the motherboard; older 12 V 4-pin RGB connectors cannot drive the lighting. PWM control needs a 4-pin fan header; 3-pin voltage control will not enable the 800 to 2000 RPM range. Hydraulic bearings tolerate horizontal or vertical orientation but are not rated for liquid-cooling radiators.
| Brand | Jungle Leopard |
|---|---|
| Series | Galaxy |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 2000RPM |
| Air Flow | 62.36CFM |
| Air Pressure | 2.21 mmAq |
| Noise Level | 29DBA |
| Power Connector | 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The hydraulic bearing is rated for long service life; routine dust removal from the blades and frame every few months keeps airflow at 62.36 CFM and noise at 29 dBA.
PWM control caps speed at 2000 RPM; sustained loads stay within the 2.21 mmAq pressure rating while the 4-pin connector regulates voltage and current.
Each fan runs at 29 dBA; three fans together add minimal case heat because the PWM curve drops speed to 800 RPM when temperatures allow.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม