Kingston Technology Corp. KF564R32RBK4-64 64GB (4x16GB) DDR5-6400 CL32 ECC Registered server RAM
- 64GB (4 x 16GB)
- 288-Pin DDR5 RDIMM
Kingston Technology Corp.
128 GB quad-channel DDR5 RDIMM kit with ECC, registered signal processing and 6400 MHz speed for workstation reliability
Capacity 128GB (4 x 32GB)
Speed DDR5 6400 (PC5 51200)
This Kingston Fury Renegade Pro kit delivers 128 GB across four 32 GB DDR5-6400 registered DIMMs with ECC and CL32 timings. It targets creators, engineers and data-science professionals who need high throughput without sacrificing data integrity on Intel or AMD platforms that require RDIMMs.
Each module uses 1Rx4 organisation and registered signalling to maintain stability at 6400 MHz while multi-bit ECC detects and corrects errors beyond the on-die single-bit correction built into every DDR5 component. The XMP 3.0 profile lets the system apply validated timings and voltage automatically.
Modules install in standard DDR5 RDIMM slots; the integrated heat spreader adds height, so verify cooler clearance before seating all four sticks. Populate slots according to the motherboard manual to enable quad-channel operation and ensure the XMP profile loads at the rated 1.35 V.
| Brand | Kingston |
|---|---|
| Series | Fury Renegade Pro |
| Model | KF564R32RBK4-128 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Heat Spreader | Yes |
| Features | Kingston FURY KF564R32RBK4-128 is a kit of four 4G x 80-bit (32GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 1Rx4, ECC memory module, based on twenty 4G x 4-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 128GB. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. |
| 配送重量 | 0.11 kg |
| 梱包サイズ | 168 × 104 × 38 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The kit runs at 1.35V with Intel XMP 3.0 profiles; no firmware updates or replacement parts are required for normal operation.
The CL32-39-39 timings at DDR5-6400 set the latency floor that appears before bandwidth saturation under continuous load.
Integrated heat spreaders dissipate heat silently; the modules add no audible noise and draw 1.35V within standard DDR5 power limits.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?