Kingston Technology Corp. KF564R32RBK4-64 64GB (4x16GB) DDR5-6400 CL32 ECC Registered server RAM
- 64GB (4 x 16GB)
- 288-Pin DDR5 RDIMM
Kingston Technology Corp.
128 GB quad-channel DDR5 RDIMM kit with ECC, registered signal processing and 6400 MHz speed for workstation reliability
Capacity 128GB (4 x 32GB)
Speed DDR5 6400 (PC5 51200)
This Kingston Fury Renegade Pro kit delivers 128 GB across four 32 GB DDR5-6400 registered DIMMs with ECC and CL32 timings. It targets creators, engineers and data-science professionals who need high throughput without sacrificing data integrity on Intel or AMD platforms that require RDIMMs.
Each module uses 1Rx4 organisation and registered signalling to maintain stability at 6400 MHz while multi-bit ECC detects and corrects errors beyond the on-die single-bit correction built into every DDR5 component. The XMP 3.0 profile lets the system apply validated timings and voltage automatically.
Modules install in standard DDR5 RDIMM slots; the integrated heat spreader adds height, so verify cooler clearance before seating all four sticks. Populate slots according to the motherboard manual to enable quad-channel operation and ensure the XMP profile loads at the rated 1.35 V.
| Brand | Kingston |
|---|---|
| Series | Fury Renegade Pro |
| Model | KF564R32RBK4-128 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Heat Spreader | Yes |
| Features | Kingston FURY KF564R32RBK4-128 is a kit of four 4G x 80-bit (32GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 1Rx4, ECC memory module, based on twenty 4G x 4-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 128GB. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. |
| 出貨重量 | 0.11 kg |
| 包裝尺寸 | 168 × 104 × 38 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The kit runs at 1.35V with Intel XMP 3.0 profiles; no firmware updates or replacement parts are required for normal operation.
The CL32-39-39 timings at DDR5-6400 set the latency floor that appears before bandwidth saturation under continuous load.
Integrated heat spreaders dissipate heat silently; the modules add no audible noise and draw 1.35V within standard DDR5 power limits.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?