Kingston Technology Corp. KF564R32RBK4-64 64GB (4x16GB) DDR5-6400 CL32 ECC Registered server RAM
- 64GB (4 x 16GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
128 GB quad-channel DDR5 RDIMM kit with ECC, registered signal processing and 6400 MHz speed for workstation reliability
Capacity 128GB (4 x 32GB)
Speed DDR5 6400 (PC5 51200)
This Kingston Fury Renegade Pro kit delivers 128 GB across four 32 GB DDR5-6400 registered DIMMs with ECC and CL32 timings. It targets creators, engineers and data-science professionals who need high throughput without sacrificing data integrity on Intel or AMD platforms that require RDIMMs.
Each module uses 1Rx4 organisation and registered signalling to maintain stability at 6400 MHz while multi-bit ECC detects and corrects errors beyond the on-die single-bit correction built into every DDR5 component. The XMP 3.0 profile lets the system apply validated timings and voltage automatically.
Modules install in standard DDR5 RDIMM slots; the integrated heat spreader adds height, so verify cooler clearance before seating all four sticks. Populate slots according to the motherboard manual to enable quad-channel operation and ensure the XMP profile loads at the rated 1.35 V.
| Brand | Kingston |
|---|---|
| Series | Fury Renegade Pro |
| Model | KF564R32RBK4-128 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Heat Spreader | Yes |
| Features | Kingston FURY KF564R32RBK4-128 is a kit of four 4G x 80-bit (32GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 1Rx4, ECC memory module, based on twenty 4G x 4-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 128GB. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. |
| Shipping weight | 0.11 kg |
| Package size | 168 × 104 × 38 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit runs at 1.35V with Intel XMP 3.0 profiles; no firmware updates or replacement parts are required for normal operation.
The CL32-39-39 timings at DDR5-6400 set the latency floor that appears before bandwidth saturation under continuous load.
Integrated heat spreaders dissipate heat silently; the modules add no audible noise and draw 1.35V within standard DDR5 power limits.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?