暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Seven inch touch display board with glass front and exposed circuit board

LORDWORLD

LORDWORLD 7 inch 1024×600 Capacitive Touch Display development board

SKU CH-PYK2-BGDRW

7-inch capacitive IPS touch display for Raspberry Pi with 1024×600 resolution and up to five touch points

  • 1024×600 IPS panel gives sharp visuals for Raspberry Pi projects
  • Up to five simultaneous touch points enable multi-finger interaction
  • Software-controlled brightness adjusts to any lighting condition
  • Works with Pi 4B, 3B+, 3A+ and Compute Modules 3+/4
  • DSI interface connects directly without extra wiring

7-inch Capacitive Touch Development Board

This LORDWORLD display board provides a 1024×600 IPS panel with a capacitive touch layer for Raspberry Pi projects. It connects through the DSI interface and supports Pi 4B, 3B+, 3A+, CM3+ and CM4 when an extra adapter board is used. Driver installation is required on Raspbian.

Sustained Operation Behaviour

Brightness is adjustable via software so the panel can be dimmed for long-running kiosk or dashboard use without generating excess heat. The five-point touch capability remains responsive during continuous interaction, limited only by the operating system's touch stack. No active cooling is integrated on the board itself.

DSI Interface and Adapter Requirement

The single deciding specification is the DSI connector combined with the mandatory adapter board for Compute Module 3+ and 4 variants. Builds that rely on HDMI or lack the adapter cannot use this display, while standard Pi 4B, 3B+ and 3A+ models connect directly.

特長

  • 1024×600 IPS panel gives sharp visuals for Raspberry Pi projects
  • Up to five simultaneous touch points enable multi-finger interaction
  • Software-controlled brightness adjusts to any lighting condition
  • Works with Pi 4B, 3B+, 3A+ and Compute Modules 3+/4
  • DSI interface connects directly without extra wiring

仕様

BrandLORDWORLD

この商品に関する質問

How much power does the 7 inch 1024×600 display draw when running all day on a Raspberry Pi?

The display connects through the Pi's DSI interface and draws power directly from the board; no separate supply is needed, so total consumption stays within the Pi's normal USB-C budget.

What extra hardware is required before the 7 inch 1024×600 touch screen will work?

You need a Raspberry Pi 4B, 3B+ or 3A+ with a DSI ribbon cable; for Compute Module 3+ or 4 an additional adapter board is also required.

Will the 7 inch 1024×600 display work with an original Raspberry Pi 1 or Pi 2 that I still own?

No — the board only supports Pi 4B, 3B+, 3A+ and Compute Module 3+/4, so older Pi 1 or Pi 2 models cannot drive the DSI interface.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。