暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive rectangular metal casing

Maxtor

Maxtor DiamondMax 10 200GB 7200RPM SATA 3.5" internal hard drive

SKU CH-Y8XM-7K2MB

200 GB desktop drive spinning at 7200 RPM with 8 MB buffer on a SATA 150 interface

  • 200 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB buffer smooths burst data transfers
  • SATA 150 interface connects to standard motherboards
  • 5 inch form factor fits typical drive bays

Maxtor DiamondMax 10 200 GB SATA drive

The Maxtor DiamondMax 10 is a 3.5 inch internal hard drive with a 200 GB capacity and a 7200 RPM spindle speed. It connects via a SATA 150 interface and includes an 8 MB buffer. The drive is supplied new in retail or OEM packaging.

Suits desktop storage upgrades; not for laptop bays

This unit fits standard 3.5 inch drive bays in desktop computers and serves as primary or secondary storage for home or office systems. It is not suitable for 2.5 inch laptop bays, external enclosures without a 3.5 inch adapter, or systems that require a SATA 3 Gb/s or 6 Gb/s interface for full performance.

SATA 150 interface determines host compatibility

The drive uses the SATA 150 standard, so the motherboard or controller must provide a matching SATA port. If the host only supports newer SATA revisions, the drive will negotiate down to 150 MB/s; if the host lacks SATA entirely, the drive cannot be connected.

特長

  • 200 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB buffer smooths burst data transfers
  • SATA 150 interface connects to standard motherboards
  • 5 inch form factor fits typical drive bays

仕様

BrandMaxtor

この商品に関する質問

What are the physical dimensions of the 3.5" drive for case clearance?

The drive measures 5.8 inches deep, .5 inch wide and 1 inch high, fitting standard 3.5 inch internal bays.

How is the SATA/150 interface connected during installation?

Attach a standard SATA data cable to the drive interface and a SATA power connector from the power supply; the step often missed is securing both cables firmly to prevent disconnection.

When should the 8 MB buffer drive be replaced under normal desktop use?

Plan replacement after three to five years or if SMART diagnostics report reallocated sectors, as the 7200 RPM mechanism wears over time.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。