저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Silver 3.5 inch SATA hard drive rectangular metal casing

Maxtor

Maxtor DiamondMax 10 200GB 7200RPM SATA 3.5" internal hard drive

SKU CH-Y8XM-7K2MB

200 GB desktop drive spinning at 7200 RPM with 8 MB buffer on a SATA 150 interface

  • 200 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB buffer smooths burst data transfers
  • SATA 150 interface connects to standard motherboards
  • 5 inch form factor fits typical drive bays

Maxtor DiamondMax 10 200 GB SATA drive

The Maxtor DiamondMax 10 is a 3.5 inch internal hard drive with a 200 GB capacity and a 7200 RPM spindle speed. It connects via a SATA 150 interface and includes an 8 MB buffer. The drive is supplied new in retail or OEM packaging.

Suits desktop storage upgrades; not for laptop bays

This unit fits standard 3.5 inch drive bays in desktop computers and serves as primary or secondary storage for home or office systems. It is not suitable for 2.5 inch laptop bays, external enclosures without a 3.5 inch adapter, or systems that require a SATA 3 Gb/s or 6 Gb/s interface for full performance.

SATA 150 interface determines host compatibility

The drive uses the SATA 150 standard, so the motherboard or controller must provide a matching SATA port. If the host only supports newer SATA revisions, the drive will negotiate down to 150 MB/s; if the host lacks SATA entirely, the drive cannot be connected.

주요 특징

  • 200 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB buffer smooths burst data transfers
  • SATA 150 interface connects to standard motherboards
  • 5 inch form factor fits typical drive bays

사양

BrandMaxtor

이 상품에 대한 질문

What are the physical dimensions of the 3.5" drive for case clearance?

The drive measures 5.8 inches deep, .5 inch wide and 1 inch high, fitting standard 3.5 inch internal bays.

How is the SATA/150 interface connected during installation?

Attach a standard SATA data cable to the drive interface and a SATA power connector from the power supply; the step often missed is securing both cables firmly to prevent disconnection.

When should the 8 MB buffer drive be replaced under normal desktop use?

Plan replacement after three to five years or if SMART diagnostics report reallocated sectors, as the 7200 RPM mechanism wears over time.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.