我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 3.5 inch SATA hard drive rectangular metal casing

Maxtor

Maxtor DiamondMax 10 200GB 7200RPM SATA 3.5" internal hard drive

SKU CH-Y8XM-7K2MB

200 GB desktop drive spinning at 7200 RPM with 8 MB buffer on a SATA 150 interface

  • 200 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB buffer smooths burst data transfers
  • SATA 150 interface connects to standard motherboards
  • 5 inch form factor fits typical drive bays

Maxtor DiamondMax 10 200 GB SATA drive

The Maxtor DiamondMax 10 is a 3.5 inch internal hard drive with a 200 GB capacity and a 7200 RPM spindle speed. It connects via a SATA 150 interface and includes an 8 MB buffer. The drive is supplied new in retail or OEM packaging.

Suits desktop storage upgrades; not for laptop bays

This unit fits standard 3.5 inch drive bays in desktop computers and serves as primary or secondary storage for home or office systems. It is not suitable for 2.5 inch laptop bays, external enclosures without a 3.5 inch adapter, or systems that require a SATA 3 Gb/s or 6 Gb/s interface for full performance.

SATA 150 interface determines host compatibility

The drive uses the SATA 150 standard, so the motherboard or controller must provide a matching SATA port. If the host only supports newer SATA revisions, the drive will negotiate down to 150 MB/s; if the host lacks SATA entirely, the drive cannot be connected.

商品特色

  • 200 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB buffer smooths burst data transfers
  • SATA 150 interface connects to standard motherboards
  • 5 inch form factor fits typical drive bays

商品規格

BrandMaxtor

商品問答

What are the physical dimensions of the 3.5" drive for case clearance?

The drive measures 5.8 inches deep, .5 inch wide and 1 inch high, fitting standard 3.5 inch internal bays.

How is the SATA/150 interface connected during installation?

Attach a standard SATA data cable to the drive interface and a SATA power connector from the power supply; the step often missed is securing both cables firmly to prevent disconnection.

When should the 8 MB buffer drive be replaced under normal desktop use?

Plan replacement after three to five years or if SMART diagnostics report reallocated sectors, as the 7200 RPM mechanism wears over time.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。