OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
myVolts
Converts AC mains to 12 V DC at up to 30 A with over-voltage, over-current and short-circuit protection
This AC-DC switching unit converts mains input to a regulated 12 V DC output rated at 30 A and 360 W. It is built for indoor equipment that requires a stable 12 volt rail, such as LED lighting arrays, CNC controllers or test bench gear. The metal enclosure aids heat dissipation in continuous-duty scenarios.
The supply accepts 110 V or 220 V AC with a ±15 % tolerance, covering common single-phase mains worldwide. Built-in safeguards include over-voltage, over-current and short-circuit protection that latch off the output until the fault is cleared. Operating temperature is specified from 0 °C to 40 °C with humidity up to 95 % non-condensing.
The 30 A rating is the decisive figure: the load must not exceed this value or the protection will trip and interrupt power. Systems drawing higher peak or sustained current need a larger model such as the 40 A or 50 A variants. This unit is not suitable for applications that require redundant or hot-swap power architectures.
| Type | AT |
|---|
Match the supply to your peak draw: the 12 V 30 A 360 W unit covers up to 30 A continuous, while lower models such as 12 V 20 A 240 W or 12 V 15 A 180 W suit smaller loads.
It is the maximum continuous DC power the supply can deliver at 12 V, so a 30 A load will run at full rated output without exceeding the 360 W limit.
The 30 A version operates on 110 V/220 V ±15 %, so it works on standard mains worldwide and its output is capped at 30 A and 360 W.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?