暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact rectangular ABS power supply unit with DIN rail mounting and terminal connections

myVolts

myVolts MDR-60-12 12V 5A 60W power supply

SKU CH-7573-76X5C MPN MDR-60-12

A compact 60 W industrial power supply delivering 12 V at 5 A with overload and over-voltage protection

  • TypeAT
  • 12 V 5 A output delivers 60 W for industrial loads
  • 85 % efficiency reduces heat and running cost
  • 100-240 VAC input works worldwide without a selector
  • 40 x 90 x 100 mm DIN-rail form factor fits standard enclosures
  • Overload and over-voltage protection guards connected equipment

Compact DIN-rail power supply

The myVolts MDR-60-12 is a new switched-mode power supply built into an ultra-thin ABS shell for industrial DIN-rail mounting. It delivers a steady 12 V output at up to 5 A for a total of 60 W, making it suitable for control panels, automation equipment and similar low-voltage DC loads. The unit accepts a universal 100-240 VAC input and measures approximately 40 x 90 x 100 mm.

12 V 5 A output rating

The single specification that decides fit is the 12 V, 5 A rated output, providing a maximum of 60 W continuous power. The current range spans 0-5 A, so any connected load must stay within that envelope; devices requiring higher voltage, higher current or a different voltage rail cannot use this unit.

85 % efficiency with protection

Operating at 85 % efficiency, the supply runs cool enough for the compact ABS enclosure without active cooling. Built-in overload and over-voltage protection shut down the output if the load exceeds 5 A or if voltage spikes occur, limiting heat rise and acoustic noise to a minimum during normal operation.

特長

  • 12 V 5 A output delivers 60 W for industrial loads
  • 85 % efficiency reduces heat and running cost
  • 100-240 VAC input works worldwide without a selector
  • 40 x 90 x 100 mm DIN-rail form factor fits standard enclosures
  • Overload and over-voltage protection guards connected equipment

仕様

TypeAT

この商品に関する質問

What does the 60 W rating mean when the unit is installed in a system?

It can deliver up to 60 W of continuous power at 12 V and 5 A, with an efficiency of 85 %, so the connected load receives a stable 12 V supply within that limit.

What input standard does the supply use and what does it cap in practice?

It accepts 100-240 V AC at 1.8 A, so it works on any mains voltage in that range and the input current will not exceed 1.8 A.

What physical space and mounting does the 40 x 90 x 100 mm unit need?

The ultra-thin rail design measures 40 mm wide, 90 mm high and 100 mm deep, fitting a standard DIN rail slot and secured by its ABS shell.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。