暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Twelve green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM 1.5TB DDR5 4800 CL40 12x128GB ECC RDIMM Supermicro H14SSF memory upgrade

SKU CH-JWD8-FG68J

1.5 TB DDR5-4800 ECC registered RDIMM kit of twelve 128 GB modules for Supermicro H14SSF servers

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

他に 24点の構成を表示
  • 5 TB capacity from twelve 128 GB modules maximises the Supermicro H14SSF memory limit
  • DDR5 4800 speed with CL40 latency delivers rated throughput without down-clocking
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 2Rx4 organisation and 1.1 V operation match the board's population rules exactly
  • 288-pin RDIMM form factor fits the server slots — no UDIMM or SODIMM confusion

Exact-match server kit

This NEMIX RAM kit delivers 1.5TB across twelve 128GB DDR5 RDIMMs. Each module runs at 4800 MT/s with CL40 latency at 1.1V. The 2Rx4 registered ECC design matches the Supermicro H14SSF memory controller requirements for full-capacity recognition.

For fully populated H14SSF builds

Suits administrators filling every DIMM slot on a compatible Supermicro H14SSF motherboard with registered ECC memory. Not for systems that require unbuffered UDIMMs, SODIMM form factors, or non-ECC operation. Verify your manual for approved population order before installation.

Sustained registered ECC stability

Registered buffering offloads the memory controller so all twelve slots operate at rated speed under continuous load. ECC corrects single-bit errors in real time, preventing silent data corruption during long-running workloads. The 1.1V operating voltage maintains efficiency throughout extended operation.

特長

  • 5 TB capacity from twelve 128 GB modules maximises the Supermicro H14SSF memory limit
  • DDR5 4800 speed with CL40 latency delivers rated throughput without down-clocking
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 2Rx4 organisation and 1.1 V operation match the board's population rules exactly
  • 288-pin RDIMM form factor fits the server slots — no UDIMM or SODIMM confusion

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Do I need a Supermicro H14SSF motherboard with 12 free 288-pin DDR5 RDIMM slots to use this 1.5 TB kit?

Yes — the kit is built for that board and requires all 12 slots to reach the full 1.5 TB capacity.

Will my existing DDR5 RDIMMs run at 4800 MT/s alongside these CL40 2Rx4 modules?

The board will clock every installed module to the lowest common speed; populate slots per the manual to keep the kit at its rated 4800 MT/s.

How can I confirm the kit is recognised at 1.5 TB with ECC active after installation?

Check the BIOS memory summary or run dmidecode — it should show 12 × 128 GB Registered ECC DIMMs at 4800 MT/s with zero correctable errors.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。