暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 256GB 4x64GB DDR5 4800 CL40 2Rx4 ECC RDIMM ASRock SIENAD10HM3

SKU CH-B9QV-RJ4GS

256 GB kit of four 64 GB DDR5-4800 CL40 2Rx4 ECC registered RDIMMs at 1.1 V for ASRock Rack SIENAD10HM3

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from four 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency runs at rated performance on the ASRock Rack SIENAD10HM3
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation matches the board's voltage requirement for stable full-population operation
  • 288-pin 2Rx4 form factor fits the motherboard's memory-population rules exactly

256 GB DDR5 ECC RDIMM Kit

This NEMIX RAM kit supplies 256 GB of DDR5 ECC Registered memory in four 64 GB modules. It is built for servers that require the registered DIMM form factor and error-correcting code to maintain data integrity under continuous load. The modules run at 4800 MHz with CL40 timing at 1.1 V.

Suited for ASRock Rack SIENAD10HM3 owners

This kit matches the memory population rules of the ASRock Rack SIENAD10HM3 motherboard, so every slot can be filled at the rated speed. Builders who need unbuffered UDIMMs, SODIMMs, or a different voltage should look elsewhere because those form factors will not fit or function on this board.

Registered ECC with 2Rx4 organization

The 2Rx4 registered ECC design is the single specification that determines compatibility; the memory controller expects this exact rank structure and buffering to initialize at full capacity. If your system requires a different rank layout or unbuffered modules, this kit will not be recognized.

特長

  • 256 GB total capacity from four 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency runs at rated performance on the ASRock Rack SIENAD10HM3
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation matches the board's voltage requirement for stable full-population operation
  • 288-pin 2Rx4 form factor fits the motherboard's memory-population rules exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the kit ship with all four 64 GB modules or must any be purchased separately?

The package contains the complete 256 GB kit as four matched 64 GB DDR5 4800 CL40 ECC RDIMM modules; nothing extra is required for a full installation.

When would I choose this 256 GB 4×64 GB DDR5 4800 CL40 kit over a smaller capacity?

Select this kit when the ASRock Rack SIENAD10HM3 board needs maximum registered ECC capacity across four slots, with 2Rx4 organisation and 1.1 V operation already validated.

What does the DDR5 4800 CL40 rating mean once the modules are installed in the server?

The memory runs at 4800 MT/s with a CAS latency of 40 cycles, delivering PC5-38400 bandwidth while registered ECC operation maintains data integrity at full population.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。