暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 64GB 2x32GB CL40 1.1V 1Rx4 ASRock Rack SIENAD10HM3 memory upgrade

SKU CH-A0P8-A0DD3

64 GB DDR5 4800 registered ECC RDIMM kit (2 × 32 GB, CL40, 1.1 V, 1Rx4) validated for ASRock Rack SIENAD10HM3

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB kit delivers full-rated DDR5 4800 speed
  • Registered ECC design prevents silent data corruption
  • 1Rx4 layout matches motherboard population rules
  • 1 V operation keeps power draw low
  • Lifetime warranty with US-based technical support

Server-grade DDR5 ECC RDIMM kit

This 64GB kit comprises two 32GB DDR5-4800 Registered ECC modules built to the PC5-38400 standard. Each stick runs at 1.1V with CL40 latency and a 1Rx4 organisation, delivering the exact electrical profile the ASRock Rack SIENAD10HM3 motherboard expects. The registered architecture buffers address and command signals so every slot can be populated without stressing the memory controller.

Verified fit for ASRock Rack SIENAD10HM3

The 288-pin RDIMM form factor matches the board's physical and electrical requirements, avoiding the incompatibility of unbuffered UDIMM or SODIMM alternatives. Population rules for this platform are strict; the kit is validated against the vendor's qualified-vendor list so the system recognises the full capacity at rated speed on first boot. Buyers whose servers demand a different DIMM type or voltage should look elsewhere.

64GB registered ECC capacity with DDR5-4800 headroom

Two ranks per channel provide ample space for virtualisation hosts, database buffers and large-scale container workloads while ECC corrects single-bit errors before they corrupt data. The DDR5-4800 data rate sustains high-throughput memory-bound tasks, yet the fixed CL40 timing and 1.1V operation set a ceiling for latency-sensitive codes that would benefit from lower-latency or higher-frequency modules not supported by this platform.

特長

  • 64 GB kit delivers full-rated DDR5 4800 speed
  • Registered ECC design prevents silent data corruption
  • 1Rx4 layout matches motherboard population rules
  • 1 V operation keeps power draw low
  • Lifetime warranty with US-based technical support

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-314K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 1Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin RDIMM modules fit the ASRock Rack SIENAD10HM3 motherboard DIMM slots?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor required by the ASRock Rack SIENAD10HM3 motherboard.

What is the correct population order when installing both 32 GB modules on this board?

Follow the motherboard manual for the approved DIMM population sequence; the kit is spec-matched to the board's memory-population rules.

Do these registered ECC modules require any periodic maintenance or scheduled replacement?

No periodic maintenance is needed; the lifetime replacement warranty covers the modules for as long as they remain in service.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。