暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 256GB 8x32GB 1Rx4 CL40 1.1V ASRock Rack SIENAD10HM3 memory upgrade

SKU CH-Y8CV-57X78

Eight 32 GB DDR5 4800 ECC registered DIMMs deliver 256 GB at CL40 and 1.1 V for the ASRock Rack SIENAD10HM3

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from eight 32 GB modules for high-density server workloads
  • DDR5 4800 speed rated at PC5 38400 for fast data throughput
  • Registered ECC design with 1Rx4 organisation corrects single-bit errors and stabilises fully populated channels
  • 1 V operating voltage matches the motherboard's memory controller specification
  • 288 pin RDIMM form factor verified compatible with ASRock Rack SIENAD10HM3

256GB DDR5-4800 ECC RDIMM kit

This 256GB kit contains eight 32GB DDR5-4800 registered ECC modules rated at CL40 and 1.10V. It is built for the ASRock Rack SIENAD10HM3 motherboard and uses the 288-pin RDIMM form factor that board requires.

Servers needing maximum registered ECC capacity

Suits administrators populating every slot on a compatible ASRock Rack platform with matched 1Rx4 modules. Not for systems that accept only unbuffered UDIMMs, SODIMMs or non-ECC memory, or for boards limited to lower total capacities.

Full 256GB at rated DDR5-4800 speed

Eight ranks of 1Rx4 modules let the memory controller run all channels fully populated at 4800 MT/s with ECC protection active. Headroom ends when the platform's maximum supported capacity or population rules are reached.

特長

  • 256 GB total capacity from eight 32 GB modules for high-density server workloads
  • DDR5 4800 speed rated at PC5 38400 for fast data throughput
  • Registered ECC design with 1Rx4 organisation corrects single-bit errors and stabilises fully populated channels
  • 1 V operating voltage matches the motherboard's memory controller specification
  • 288 pin RDIMM form factor verified compatible with ASRock Rack SIENAD10HM3

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-314K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 4800MHz PC5-38400 1Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the ASRock Rack SIENAD10HM3 motherboard need to support DDR5 4800 RDIMM modules for this kit to function?

Yes, the motherboard must accept DDR5 4800 Registered DIMMs at 1.1 V with CL40 timing; the kit is built to the exact rank, voltage and timing the board's memory controller expects.

Can I mix these 1Rx4 Registered ECC modules with unbuffered UDIMMs already installed in the server?

No, Registered RDIMMs and unbuffered UDIMMs cannot be mixed on the same platform; the memory controller requires one consistent module type across all populated slots.

How do I confirm the full 256 GB is recognised and running at DDR5 4800 after installation?

Check the BIOS memory summary or the OS memory report; both should show 256 GB total capacity, DDR5 4800 speed and ECC active on all eight slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。