暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green 288-pin DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM MR38400-924K2 128GB (2x64GB) DDR5 4800 ECC RDIMM for ASRock Rack SIENAD10HM3

SKU CH-6CTX-4V854

128 GB DDR5 4800 ECC registered RDIMM kit (2 × 64 GB, CL40, 1.10 V, 2Rx4) validated for the ASRock Rack SIENAD10HM3 motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

他に 3点の構成を表示
  • 128 GB kit (2 × 64 GB) gives full rated capacity at DDR5-4800
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • CL40 timing at 1.1 V matches the memory controller's exact expectations
  • 288-pin RDIMM form factor fits the ASRock Rack SIENAD10HM3 motherboard
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade stability

Targeted server upgrade

This 128GB kit delivers two 64GB DDR5 4800 Registered ECC RDIMMs built to the exact rank, voltage and timing the ASRock Rack SIENAD10HM3 expects. The 2Rx4 organisation and 1.10V operation let the memory controller recognise full capacity immediately. It is not for builders who need UDIMM or SODIMM form factors.

Sustained throughput

Registered buffering offloads the memory controller so every slot runs fully populated at the rated 4800 MT/s without downclocking under continuous load. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The CL40 latency stays consistent across extended workflows.

Thermals and power

Modules operate at the standard 1.10V DDR5 voltage with no heat spreader, relying on chassis airflow for cooling. Power draw scales with the 2Rx4 density across the 288-pin interface. Noise is determined entirely by the server fans.

特長

  • 128 GB kit (2 × 64 GB) gives full rated capacity at DDR5-4800
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • CL40 timing at 1.1 V matches the memory controller's exact expectations
  • 288-pin RDIMM form factor fits the ASRock Rack SIENAD10HM3 motherboard
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade stability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the DDR5 4800 kit draw at its rated 1.10 V when the server runs continuously?

Each module operates at 1.10 V, the standard DDR5 voltage, so total draw depends on how many of the 288-pin RDIMM slots your board populates and the memory controller load.

What motherboard slot type must already be present for these 288-pin RDIMMs to function?

The ASRock Rack SIENAD10HM3 must provide DDR5 RDIMM slots; the kit will not fit UDIMM or SODIMM sockets and requires the registered DIMM interface the board is designed for.

Will the registered ECC design work with older unbuffered DDR5 DIMMs still installed in other slots?

No, registered and unbuffered modules cannot be mixed on the same channel; the board expects a consistent registered ECC population across every populated slot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。