暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR5 RDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 4800 CL40 2Rx8 1.1V ECC RDIMM Supermicro H14SSF memory upgrade

SKU CH-9TJP-KMXRH

48 GB DDR5-4800 ECC registered RDIMM built for the Supermicro H14SSF motherboard

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 48GB

他に 24点の構成を表示
  • Exact-match upgrade for Supermicro H14SSF
  • 48GB DDR5 4800 CL40 2Rx8 registered ECC
  • 1V operation reduces server power draw
  • 288-pin RDIMM form factor fits board slots
  • Lifetime replacement warranty with US-based support

Exact-match DDR5 RDIMM for Supermicro H14SSF

This 48GB DDR5-4800 registered ECC module delivers the precise 2Rx8 rank structure, 1.1V operating voltage and CL40 timing the H14SSF memory controller expects. The 288-pin RDIMM form factor matches the board's slot requirement so the full capacity is recognised at rated speed.

Who this suits and who should look elsewhere

Server administrators upgrading a Supermicro H14SSF platform gain enterprise stability from registered buffering and on-the-fly ECC correction that prevents silent data corruption. Builders needing UDIMM, SODIMM or non-ECC memory for workstations or consumer boards cannot use this module.

Installation notes and common pitfalls

The RDIMM seats in the standard 288-pin DDR5 slot like any registered DIMM, but the server manual dictates exact population order and maximum supported capacity per channel. Skipping the manual often leaves slots unrecognised or forces the system to run at reduced speed.

特長

  • Exact-match upgrade for Supermicro H14SSF
  • 48GB DDR5 4800 CL40 2Rx8 registered ECC
  • 1V operation reduces server power draw
  • 288-pin RDIMM form factor fits board slots
  • Lifetime replacement warranty with US-based support

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the Supermicro H14SSF motherboard need to support DDR5 RDIMMs at 4800 MT/s and 1.1 V before I install this 48 GB module?

Yes. The board must accept 288-pin registered DDR5 ECC DIMMs rated for PC5-38400 at 1.10 V with CL40 timing, otherwise the module will not be recognized at full capacity or speed.

Can I add this 2Rx8 registered ECC DDR5 DIMM to existing registered ECC DDR5 modules already installed in the H14SSF?

Yes, provided the installed modules are also registered ECC DDR5 RDIMMs and the motherboard's population rules allow mixing ranks; the 2Rx8 organization and 1.1 V operation must match the other DIMMs for stable operation.

How can I confirm the module is running at its rated 4800 MT/s CL40 after installation?

Check the BIOS memory information or an OS tool such as dmidecode to verify the reported speed shows 4800 MT/s (PC5-38400), CAS latency 40, voltage 1.1 V, and the full 48 GB capacity per module.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。