暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 192GB (2x96GB) 4800MHz CL40 ECC RDIMM Supermicro H14SSF memory upgrade

SKU CH-QE1W-C7E92

A 192 GB DDR5 kit of two 96 GB ECC registered RDIMMs running at 4800 MHz CL40, validated for the Supermicro H14SSF motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

他に 24点の構成を表示
  • 192 GB total capacity for memory-intensive workloads using two 96 GB modules
  • DDR5 4800 speed with CL40 latency runs at rated performance on the H14SSF
  • ECC registered design corrects single-bit errors and supports full population stability
  • 10 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the server board

Exact DDR5-4800 kit for Supermicro H14SSF

This 192 GB kit delivers two 96 GB DDR5 4800 MHz registered ECC RDIMMs built to the board’s 288-pin, 1.1 V, CL40, 2Rx4 specification so the memory controller recognises full capacity at rated speed without manual tuning.

Who it suits and who should look elsewhere

Ideal for administrators expanding a Supermicro H14SSF platform that requires registered ECC modules in matched pairs; builders needing unbuffered UDIMMs, SODIMM form factors, lower-density sticks or non-ECC memory will not be able to use this kit.

What the bundle changes

The matched-pair packaging guarantees identical rank, voltage and timing across both slots so the server populates cleanly at full 192 GB without population-order trial and error.

特長

  • 192 GB total capacity for memory-intensive workloads using two 96 GB modules
  • DDR5 4800 speed with CL40 latency runs at rated performance on the H14SSF
  • ECC registered design corrects single-bit errors and supports full population stability
  • 10 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the server board

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my Supermicro H14SSF motherboard need a specific DIMM population order for this 2Rx4 288-pin kit?

Yes, the H14SSF manual defines the supported capacities and approved DIMM population order. Follow that guide so both 96 GB modules are recognised at full 192 GB capacity.

Can I keep my existing DDR5 4800 CL40 ECC RDIMMs installed alongside this 2x96 GB kit?

Only if the installed modules match the same 2Rx4 rank, 1.1 V voltage, CL40 timing and registered ECC specification; otherwise the memory controller may downclock or reject the mixed population.

How do I confirm the kit is running at DDR5 4800 with ECC active after installation?

Enter the BIOS or use a hardware-inventory tool and verify the reported speed shows 4800 MT/s, the capacity reads 192 GB, and ECC status is reported as enabled or active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。