暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 288GB (6×48GB) 4800MHz CL40 ECC RDIMM Supermicro H14SHM

SKU CH-MAR4-KNMCT

Six 48 GB DDR5 registered ECC modules deliver 288 GB at 4800 MHz CL40 for the Supermicro H14SHM motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 288 GB total capacity from six 48 GB modules for large-scale server workloads
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth on compatible platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operating voltage reduces power draw per module in dense configurations
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14SHM motherboard

Exact-match DDR5 ECC RDIMM kit

This 288GB kit contains six 48GB DDR5 modules rated at 4800MHz with CL40 latency and 1.10V operation. Registered ECC architecture with 2Rx8 organisation is designed for the Supermicro H14SHM motherboard. It targets server builds that require maximum registered capacity and error correction.

Thermals and power draw

Modules operate at the standard 1.10V DDR5 voltage without heat spreaders, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all slots are populated. Power consumption scales with the fully populated 288GB configuration at rated speed.

Build integration

The 288-pin RDIMM form factor fits only boards that support registered DDR5 memory and the specific population rules of the H14SHM. No UDIMM or SODIMM slots will accept these modules. Installers must follow the motherboard manual for approved DIMM order and maximum supported capacity per channel.

特長

  • 288 GB total capacity from six 48 GB modules for large-scale server workloads
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth on compatible platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operating voltage reduces power draw per module in dense configurations
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14SHM motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the six 48 GB DDR5 RDIMMs in the Supermicro H14SHM, and which slot-population step is most often missed?

Populate the six 288-pin RDIMM slots in the exact order listed in the H14SHM manual so the memory controller sees the 2Rx8 ranks at 1.1 V and 4800 MT/s; skipping the prescribed sequence is the step that causes partial capacity detection.

What maintenance or replacement will this 288 GB DDR5 ECC RDIMM kit need during its service life?

The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; only a DIMM that develops uncorrectable ECC errors would need replacement under the lifetime warranty.

What is the first limit reached when all six 48 GB RDIMMs run sustained workloads at 4800 MT/s?

The registered buffer and 1.1 V operation keep every slot at the rated 4800 MT/s CL40, so the practical ceiling is the motherboard's maximum supported capacity rather than a thermal or signal-integrity bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。