暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 4800 256GB 2x128GB CL40 ECC RDIMM Supermicro H13SSW memory upgrade

SKU CH-CQ9V-1NRT1

256 GB DDR5-4800 ECC registered RDIMM kit (2 × 128 GB, CL40, 1.1 V) validated for the Supermicro H13SSW motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from two 128 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the motherboard's rated timing exactly
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank aligns with the platform's voltage and population rules
  • 288-pin RDIMM form factor fits the Supermicro H13SSW DIMM slots precisely

Supermicro H13SSW DDR5 upgrade

This 256 GB kit delivers two 128 GB DDR5 4800 RDIMMs built to the Supermicro H13SSW motherboard's exact memory-controller requirements. It targets server administrators who need registered ECC memory that the board recognises at full capacity and rated speed without manual tuning.

DDR5 4800 RDIMM limits

The modules operate at DDR5 4800 (PC5-38400) with CL40 latency at 1.10 V, the standard JEDEC ceiling for this generation. Registered buffering and 2Rx4 organisation allow every slot to run fully populated, but the kit cannot exceed the motherboard's qualified-vendor list, maximum per-slot capacity or population-order rules.

2Rx4 registered ECC decides fit

The dual-rank 2Rx4 registered ECC layout is the single specification that determines whether this kit works in your H13SSW configuration. If your system requires single-rank UDIMMs, non-ECC modules or a different rank structure, this memory will not be compatible.

特長

  • 256 GB total capacity from two 128 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the motherboard's rated timing exactly
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank aligns with the platform's voltage and population rules
  • 288-pin RDIMM form factor fits the Supermicro H13SSW DIMM slots precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 2x128GB kit or a different capacity for my Supermicro H13SSW?

The 256GB kit provides two 128GB RDIMMs at DDR5-4800 CL40 1.1V 2Rx4, matching the board's registered ECC requirements for full-capacity operation.

What does the DDR5-4800 PC5-38400 rating deliver in this server?

It runs at 4800 MT/s with CL40 latency at 1.1V, giving the rated bandwidth of PC5-38400 when the motherboard populates both slots with these registered ECC modules.

How does the 288-pin RDIMM interface limit speed and capacity on this platform?

The registered 288-pin DDR5 RDIMM form factor lets the H13SSW memory controller drive both 128GB 2Rx4 modules at the full 4800 MT/s rated speed without downclocking.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。