暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 120mm sleeve-bearing CPU cooler fan with three-pin connector

OEM Industries

OEM Industries KM121225LS 120mm Sleeve Bearing CPU cooler

SKU CH-G755-09XFP

A 120 mm sleeve-bearing fan drawing 0.18 A at 12 V with a two-wire three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDNo
  • 120mm fan fits standard CPU cooler mounts
  • Sleeve bearing keeps noise low during operation
  • 12V 0.18A draw limits power consumption
  • Two-wire connector simplifies motherboard installation
  • Black finish suits most build aesthetics

Compact 120 mm fan for basic CPU cooling

The OEM Industries KM121225LS is a 120 mm sleeve-bearing fan intended as a replacement or upgrade for stock CPU coolers. It suits builders who need a simple, low-cost airflow solution for standard desktop processors.

Sleeve bearing and two-wire power connector

The fan uses a sleeve bearing for quiet operation at low speeds and connects via a two-wire lead that fits a three-pin header. The black frame blends with most builds, while the lack of LEDs keeps the appearance understated.

Low power draw and modest thermal performance

Rated at 12 V and 0.18 A, the motor draws minimal power from the motherboard header. In normal use it moves enough air for entry-level CPUs but will not satisfy high-TDP chips or overclocked workloads.

特長

  • 120mm fan fits standard CPU cooler mounts
  • Sleeve bearing keeps noise low during operation
  • 12V 0.18A draw limits power consumption
  • Two-wire connector simplifies motherboard installation
  • Black finish suits most build aesthetics

仕様

ModelKM121225LS
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDNo

この商品に関する質問

What power connector does the KM121225LS use and what voltage does it draw?

The cooler uses a 3-pin connector carrying two wires and is rated for 12 V at 0.18 A.

What are the physical dimensions and mounting points of the KM121225LS?

The unit is a 120 mm square fan frame with standard corner mounting holes for 120 mm fan positions on cases or heatsinks.

How do you install the KM121225LS and which orientation step is often missed?

Mount the fan with four screws through the corner holes, then connect the 3-pin plug to a 12 V fan header; the arrow on the frame must point in the desired airflow direction.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。