Sapphire Tech Pulse Radeon RX 9070 XT 11348-03-20G graphics card
- PCI Express 5.0 x16
- AMD
Sapphire Tech
Delivers 16 GB GDDR6 on a 256-bit bus with boost clocks up to 3060 MHz, PCIe 5.0 x16, and triple-fan cooling in a 3.2-slot ATX design
Option NITRO+
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
Edition RX 9070 XT
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
This graphics card uses the AMD Radeon RX 9070 XT GPU built on RDNA 4 architecture. It delivers 16GB of GDDR6 memory across a 256-Bit interface running at 20 Gbps. The board targets enthusiasts who want high-frame-rate 4K gaming and content creation workloads. A triple-fan cooler handles the 304W thermal design power.
Your power supply must provide at least 850W and include a native 12V-2x6 connector for the single PCIe 5.0 power input. Verify the case can clear 331 mm in length and 3.2 slot width for the ATX form factor. Ensure the motherboard has a PCI Express 5.0 x16 slot to match the card interface. Confirm display cables suit two HDMI and two DisplayPort 2.1a outputs.
The 4096 stream processors and boost clock up to 3060 MHz suit high-refresh 4K gaming and GPU-accelerated creative apps. Users with smaller cases, PSUs below 850W, or older PCIe 3.0 platforms should consider a shorter, lower-power model. Multi-monitor setups benefit from the four-display support at 7680 x 4320 max resolution.
| Brand | SAPPHIRE |
|---|---|
| Series | NITRO+ |
| Model | 11348-01-20G |
| Part Number | 11348-01-20G |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 9000 Series |
| GPU | Radeon RX 9070 XT |
| Architecture | RDNA 4 |
| Game Clock | Up to 2520 MHz |
| Boost Clock | Up to 3060 MHz |
| Stream Processors | 4096 |
| Effective Memory Clock | 20000 MHz (20 Gbps) |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI |
| DisplayPort | 2 x DisplayPort 2.1a |
| Color | Gray |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 304W |
| Recommended PSU Wattage | 850W |
| Power Connector | 1 x 12V-2x6-pin |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 331 mm |
| Card Dimensions (L x H) | 331 x 129 x 66 mm |
| Slot Width | 3.2 Slots |
| 配送重量 | 2.63 kg |
| 梱包サイズ | 432 × 241 × 89 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The card ships with the triple-fan cooler installed and a 12V-2x6 power adapter. You must supply an 850W PSU, a PCIe 5.0 x16 slot and your own display cables.
This model is a single SKU with 16GB GDDR6 on a 256-bit bus and a 3060 MHz boost clock; there are no alternate memory sizes or factory-overclocked variants to choose from.
It is the peak frequency the GPU can reach under load, limited by the 304W power budget, thermals and the 850W PSU you provide.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?