Sapphire Tech Pulse Radeon RX 9070 XT 11348-03-20G graphics card
- PCI Express 5.0 x16
- AMD
Sapphire Tech
Delivers 16 GB GDDR6 on a 256-bit bus with boost clocks up to 3060 MHz, PCIe 5.0 x16, and triple-fan cooling in a 3.2-slot ATX design
Option NITRO+
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
Edition RX 9070 XT
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
This graphics card uses the AMD Radeon RX 9070 XT GPU built on RDNA 4 architecture. It delivers 16GB of GDDR6 memory across a 256-Bit interface running at 20 Gbps. The board targets enthusiasts who want high-frame-rate 4K gaming and content creation workloads. A triple-fan cooler handles the 304W thermal design power.
Your power supply must provide at least 850W and include a native 12V-2x6 connector for the single PCIe 5.0 power input. Verify the case can clear 331 mm in length and 3.2 slot width for the ATX form factor. Ensure the motherboard has a PCI Express 5.0 x16 slot to match the card interface. Confirm display cables suit two HDMI and two DisplayPort 2.1a outputs.
The 4096 stream processors and boost clock up to 3060 MHz suit high-refresh 4K gaming and GPU-accelerated creative apps. Users with smaller cases, PSUs below 850W, or older PCIe 3.0 platforms should consider a shorter, lower-power model. Multi-monitor setups benefit from the four-display support at 7680 x 4320 max resolution.
| Brand | SAPPHIRE |
|---|---|
| Series | NITRO+ |
| Model | 11348-01-20G |
| Part Number | 11348-01-20G |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 9000 Series |
| GPU | Radeon RX 9070 XT |
| Architecture | RDNA 4 |
| Game Clock | Up to 2520 MHz |
| Boost Clock | Up to 3060 MHz |
| Stream Processors | 4096 |
| Effective Memory Clock | 20000 MHz (20 Gbps) |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI |
| DisplayPort | 2 x DisplayPort 2.1a |
| Color | Gray |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 304W |
| Recommended PSU Wattage | 850W |
| Power Connector | 1 x 12V-2x6-pin |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 331 mm |
| Card Dimensions (L x H) | 331 x 129 x 66 mm |
| Slot Width | 3.2 Slots |
| 배송 무게 | 2.63 kg |
| 포장 크기 | 432 × 241 × 89 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The card ships with the triple-fan cooler installed and a 12V-2x6 power adapter. You must supply an 850W PSU, a PCIe 5.0 x16 slot and your own display cables.
This model is a single SKU with 16GB GDDR6 on a 256-bit bus and a 3060 MHz boost clock; there are no alternate memory sizes or factory-overclocked variants to choose from.
It is the peak frequency the GPU can reach under load, limited by the 304W power budget, thermals and the 850W PSU you provide.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?